With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Okey, this is a very simple gun, wich is made just for showing people how-to-use-a-spring-in-a-standard-block-trigger-gun. shoots a fine 40 feet (wit...
get yourself: 1 spring, about 1 cm diameter and about 7 cm long. 1 rubber band, fo rthe auto cocking, as small as possible (even those tiny little ha...
i know its crap, i just used it because its simple, sturdy, squizeable and connectable to this gun! the pics should be easy enough, if not, you really...
the pic should be lear enoug, just two yellow rods with a white one in between, spring slided over one side of the ram, and finally two white rods for...
just follow the pictures, i think they are clear anough.
this is just a blue rod with a grey (1 slot) connector clipped on it, and put it in the clone machine.
this may sound very easy, but maybe can be a little harder than you might think, the pictures will clear it up :)
just connect the two yellow rods to the two rd rods, on the back o fthe gun, dont forget to put the pieces od two steps before on it before adding the...
add one rubber band to the trigger, and then wrap it around the front handle. to load, put you left thumb on the red connector on the back of the gun...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »