Introduction: How to Make Stickers With Your Hands

 
1).select the decal or stencil that u wanna make.
2).print it on a paper,a simple paper.with the size that u want to make the sticker.
3).put the paper that u already print it on the vinyle paper,and fix it on it with a Adhesive tape.
4)take a pen and redraw the drawing and try to push a little the pen when you are doing this operation.
5)take off the paper from the vinyle paper,and u will get the effects of the pen on the vinyle paper.
6)take a sharp blade and cut the vinyle paper following the pen effects.
7)take off the undesirable parts,and you will get your vinyle sticker.

NOTICE:for everyone who want to do this,remember u need a big patience.i take hours with complicated stickers.

Comments

author
1980toyota (author)2015-01-20

Where do you get the vinyl sticker paper, transfer tape etc. at to do these vinyl stickers?

author
Sam Stick (author)2013-11-28

those are the steps

S1.JPGS2.JPGS3.JPGS4.JPGS5.JPGS6.JPGS7.JPGS8.JPGS9.JPGS10.JPGS11.JPGS12.JPGS13.JPG
author
Sam Stick (author)2013-11-22

1).select the decal or stencil that u wanna made.
2).print it on a paper,a simple paper.with the size that u want to make the sticker.
3).put the paper that u already print it on the vinyle paper,and fix it on it with a Adhesive tape.
4)take a pen and redraw the drawing and try to push a little the pen when you are doing this operation.
5)take off the paper from the vinyle paper,and u will get the effects of the pen on the vinyle paper.
6)take a sharp blade and cut the vinyle paper following the pen effects.
7)take off the undesirable parts,and you will get your vinyle sticker.

NOTICE:for everyone who want to do this,remember u need a big patience.i take hours with complicated stickers.
AND SOON I WILL SHOW MY VIDEO.
flag[delete]

author
Rodney7799 (author)2013-11-22

Looks like they are drawn using a computer then printed on a sticker machine.

author
Sam Stick (author)Rodney77992013-11-22

no sir this is a vinyle stickers i cutted them with my hand i will show all of you how to do this

author
Sam Stick (author)Sam Stick2013-11-22

look my friend,for a begginer u should start with a simple stencil ok,
1).select the decal or stencil that u wanna made.
2).print it on a paper,a simple paper.with the size that u want to make the sticker.
3).put the paper that u already print it on the vinyle paper,and fix it on it with a Adhesive tape.
4)take a pen and redraw the drawing and try to push a little the pen when you are doing this operation.
5)take off the paper from the vinyle paper,and u will get the effects of the pen on the vinyle paper.
6)take a sharp blade and cut the vinyle paper following the pen effects.
7)take off the undesirable parts,and you will get your vinyle sticker.

NOTICE:for everyone who want to do this,remember u need a big patience.i take hours with complicated stickers.
AND SOON I WILL SHOW MY VIDEO.

author
Sam Stick (author)2013-11-22

look my friend,for a begginer u should start with a simple stencil ok,
1).select the decal or stencil that u wanna made.
2).print it on a paper,a simple paper.with the size that u want to make the sticker.
3).put the paper that u already print it on the vinyle paper,and fix it on it with a Adhesive tape.
4)take a pen and redraw the drawing and try to push a little the pen when you are doing this operation.
5)take off the paper from the vinyle paper,and u will get the effects of the pen on the vinyle paper.
6)take a sharp blade and cut the vinyle paper following the pen effects.
7)take off the undesirable parts,and you will get your vinyle sticker.

NOTICE:for everyone who want to do this,remember u need a big patience.i take hours with complicated stickers.
AND SOON I WILL SHOW MY VIDEO.