Introduction: Super Big Heels
This is actually a piñata I made for the marriage of my friend Paulina O.
she designed it and I started to make the molds in my work.
materials:
.- mold
- cardboard
- scissors
- my glue
- crepe paper (red and black)
- old newspaper
- other glue (liquid silicon)
- masking tape
- things to fill the piñata
Step 1: Step One: Making the Mold
I spent time making the molds in my work, as I mentioned ..
First I drew on the board the basis of the heel and then transferred the design to a sheet of paper. I began to cut and see how they looks.
To make the heel, drew the same figure three times.
use masking tape to join the parts
Step 2: Round the Front
round the front and side, then masking tape-it
resembles the original design?
Step 3: Once You Have the Molds, Photocopy It
photocopy the molds. enlarge them!
Step 4: Trace the Molds in Cardboard
once you trace the molds at the cardboard. cut the pieces.
join all the parts together (the enlarged ones) with liquid silicon, and masking tape.
Then use my paste to glue the parts, reinforce it with newspaper.
Start to glue crepe paper (black) on the side-
Step 5:
paste the crepe paper
with the glue
Step 6: The Surprises With Come
continue to paste the crepe paper and add the gate to drop the surprises
Step 7:
put a little stick to open the surprises gate.
Attach a thread to joining the bow
Step 8: Make a Bow to Pull the Gate
make a bow out of newspaper.
glue some crepe paper to make it red.
is attached to the thread.. to the gate
Step 9: Its Time to Surprises All
put the surprises on, and cover the heel piñata with a nice pink cardboard!
Step 10: And There Is a Heel Pi�ata!
use it as you want!
Participated in the
Make It Real Challenge