With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
ever wanted to have a powerful speaker system for those inpromtue garden parties/field raves. many will say this is a redundant Instructable, as there...
First step as always is, what do you need?Components:-speaker cones (take them out of a couple of sets of computer speakers)-amplifier chip (see next ...
this step is to ensure that you don't go and buy components that are mis-matched. the first thing that I found were the cones, I found these laying ar...
ok below is the schematic that i followed for the chip stated erlier, a simple schematic will be included in the datasheet of the amplifier you purcha...
In the project box that you have you will need to mark out a section to be cut out to allow the chip heatsink to pertrude. A hole for the potentiomete...
The method i used to produce the speakers was very simple, cutting 4 strips of aluminium with the demel and drilling holes in ether end of each so tha...
run the appropriate cables throutgh the appropriate holes and solder on the connectors, the 3.5mm headphone jack and the deans "t" power connectors. A...
Apply power to the power leads and plug in the 3.5mm jack making sure that the volume on the mp3 player is on minimum, increase the volume a small amo...
This step is more of a convenience as hopefully your speakers are already working! I found a cardboard box that looked to be the right size to house e...
Get raving! the speakers can be used whilst they are still in the box for convenience or the speakers removed for improved stereo sound. Now you can...
Remove these ads by
Signing Up
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »
i need to know so i can get some :]
great ible though ! :)