video the S2 bolt action pistol
hey guys ! this is the next gun in my S series of guns which are supposed to be my best guns yet in different categories. anyway, this is a b/a pistol (true, obviously) that i built 6 months ago, but didn't finish. there were problems and bugs and so on... i dug it up of the closet about two weeks ago and gave it another go and it now works amazingly !!! the range/strength is just the same as the zkar or my S1 (about 50 ft with one #28 band, about 100+ ft with three), which is amazing since it's just a teeny, tiny pistol. it's very comfortable, quite accurate (up to about 30~40 ft), VERY strong and has great looks (IMO). it also has a realistic feel to it, the way you cock it and the size... anyway, i'll stop annoying you for now, and let you be annoyed by my video lol.
check out the instructable of it.
check out the instructable of it.
Flag this comment as:
Not NiceInappropriateSpam
23
PotatoCoffee
says:
Sep 13, 2012. 2:13 PMReplyBolt action owns! Also since when have you been Ray William Johnson?
24
Sharir1701 (author)
in reply to Sep 13, 2012. 2:34 PMReplyYes it does! I don't know, it just came naturally and I went with it lol. I'm sure rwj won't notice...
23
PotatoCoffee
in reply to Sep 13, 2012. 11:12 PMReplyLol, I actualy got something right for once! I'll get Smosh to call him...
24
Sharir1701 (author)
in reply to Sep 14, 2012. 5:37 PMReplylol
23
PotatoCoffee
in reply to Sep 15, 2012. 12:15 AMReply=P
61
Oblivitus
says:
Jun 25, 2012. 7:07 AMReply
Looks good. Does it chamber the round or something? Do the rounds interlock? I might build it when I free some parts up.
24
Sharir1701 (author)
in reply to Jun 25, 2012. 7:42 AMReplybolt action means it chambers the round. when you pull the bolt, or in this case slide, back, it cocks the ram and let's a bullet from the magazine go up to the place where the bolt pin (orange rod in this case) was. then, when you push the bolt back forward, or in this case let go of it and let it go forward on it's own, it pushes the fresh bullet onto a ramp which causes it to go up to the chamber, where it is held in place by a bullet lock and then fired when you pull the trigger. this mechanism was invented by Zak (in his zkar) to eliminate the interlocking problem and allow for a gun that is essentially a one-shot, but with a mag. if you don't understand what i mean i'll draw you a sketch. basically it's what real guns do.
61
Oblivitus
in reply to Jun 25, 2012. 5:59 PMReply
Yep, I understand the concept. Sometimes people call a gun a bolt action just for having a bolt on the outside though. Which I suppose should have been fairly obvious to me that that wasn't what you meant whereas you have no bolt sticking out of this, but I couldn't see the inside so I wanted to know.
24
Sharir1701 (author)
in reply to Jun 26, 2012. 3:42 AMReplyyes, that's true, but lately, people don't just throw the word bolt action around for having an external loading handle on their gun. it's something that used to happen a lot, but not anymore. anyway if a person says true bolt action, rest assure that it chambers the round.
61
Oblivitus
in reply to Jun 26, 2012. 7:06 AMReply
Gotcha.
24
Sharir1701 (author)
in reply to Jul 17, 2012. 7:27 PMReplyso did you ever build it?
61
Oblivitus
in reply to Jul 18, 2012. 6:23 AMReply
Still no parts. Still working on the Z3 instructions.
24
Sharir1701 (author)
in reply to Jul 18, 2012. 7:05 AMReplyoh ok. i don't get why you don't just take the gun apart and rebuild it while taking pics. it's not that difficult, and it will take like a tenth of the time this is taking you. you should be able to finish making all the pics you need in a little less than 2 hours, maybe 3 because it's a big gun. besides, mlcad can sometimes be harder to understand than pics of the real live thing.
61
Oblivitus
in reply to Jul 18, 2012. 11:18 AMReply
Yeah, I know. I like challenges, but I seem to have hit the limit of difficulty on MlCad trying to make these instructions perfect and now it's just driving me crazy, I'm going to use a different approach next time. I think I'll just design it on the computer as if I were doing it by hand next time, that should be much faster and simpler. My approach for this gun has been to design separate models of all the guns parts, and then, well, never mind, the process I used this time is a complicated mess anyways. The main reason I kept making them on the computer was for a challenge- to make a perfect, clear instructable, but that's getting old and tiring. As I said, I'm going to simplify it next time.
24
Sharir1701 (author)
in reply to Jul 18, 2012. 5:13 PMReplythe mlcad models aren't always so clear and perfect. they are usually harder to understand than real pictures. i don't know, it seems like a big waste. also, what's the challenge in that? you know how to operate the software. the design itself is just a lot of unnecessary hard work. but you know, if you'd rather like this, i'm no one to tell you what to do...
61
Oblivitus
in reply to Jul 19, 2012. 6:35 AMReply
Lol. Just lol. I know. Yes, most of what I do is ridiculously difficult, it's just part of my obsessive nature to push things to the limit until they blow up. It seems like a waste of time but it's very educational.
56
dr. richtofen
says:
Jun 25, 2012. 10:51 PMReplyGreat pistol! It definatly looks better than my b/a pistol, and it shoots better looking at your ranges. Awesome job!
24
Sharir1701 (author)
in reply to Jun 26, 2012. 3:36 AMReplythanks !
56
dr. richtofen
in reply to Jun 26, 2012. 3:43 AMReplyNo problem =D
24
Sharir1701 (author)
in reply to Jun 26, 2012. 3:56 AMReplydanke ! sorry that's pretty much the only german i know lol. i guess i know stuff like ja unt nein, ein, tzei, drei, rousse (i hope i wrote that right, i meant the word "out"), heil...
56
dr. richtofen
in reply to Jun 26, 2012. 5:02 AMReplyLol, bitte schon (ibles' doesn't accept letters like O with those dots) I think 'out' is Draus. I've had 2 years of german on school, but I wasn't too good at it... But I know some basic things.
24
Sharir1701 (author)
in reply to Jun 26, 2012. 5:31 AMReplywait, aren't you german? and btw, check out my S2 mech in the instructable i just posted.
56
dr. richtofen
in reply to Jun 26, 2012. 6:56 AMReplyNo, hehe. I'm from the Netherlands. I'll take a look now. (can't built it though, just finished a non shooting version of Gtrains vector for my sister, and I have a new D.Eagle finished.)
24
Sharir1701 (author)
in reply to Jun 26, 2012. 7:55 AMReplyok cool. does the D.Eagle shoot? i'd like to have a shooting deagle. i never actually tried, but i haven't seen any decent ones here.
56
dr. richtofen
in reply to Jun 26, 2012. 8:02 AMReplyNo, too bad it doesn't shoot. I'd like to make it shoot, but I fail in that and make it looking good at the same time.
24
Sharir1701 (author)
in reply to Jun 26, 2012. 10:55 AMReplycould you send me a pic of it and maybe i could help in making it shoot?
56
dr. richtofen
in reply to Jun 26, 2012. 11:38 AMReplyI've posted a slideshow. If you want, I can take some more though.
8
sandroknexmaster
says:
Jun 24, 2012. 5:36 AMReplyCool gun! Are you gonna make instructions?
24
Sharir1701 (author)
in reply to Jun 24, 2012. 11:29 AMReplyyes, i said i'm gonna post it.
61
Oblivitus
in reply to Jun 25, 2012. 6:03 PMReply
He probably didn't watch the whole video. 5 minutes isn't bad especially compared to 15 minutes, but a lot of people are still going to skip around if you don't focus on the main points the entire time.
24
Sharir1701 (author)
in reply to Jun 26, 2012. 3:39 AMReplyyeah, you know i tend to make too long videos, but i tried to make it short this time because i didn't want to ruin a gun i really like by making a video too long for anybody to watch. lol
8
sandroknexmaster
in reply to Jun 26, 2012. 4:23 AMReplyI don't speak good english so maybe I just didn't hear it
24
Sharir1701 (author)
in reply to Jun 26, 2012. 5:31 AMReplyoh that's ok.
Flag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
