loading
It is a fun plain to make. I had a lot of fun making it.

Step 1: Supplies

I foud these around the house.
6 sheets of paper,
staples and stapler
or glue
and 7 or 8 feet of
string.












































































































































































































































































































































































Step 2: Building It

Get a peice of paper and fold the top right and left part of the
paper equaly.same with the bottom.
do the same with a nother peice of paper.

Step 3: Making the Dimond

Now that you have done that get your glue or
stapler and glue/staple it together. It should look like a flat dimond

Step 4: Ataching the Wings

Now we make the wings. Get a peice of paper and put it sideways
and fold it in half twice. Do the same with three other papers.
Cut one in half.Take two other ones and atach them evenly on the dimond.Get the one that you cut in half and atach them on the end of the wing one on each wing.

Step 5: Finishing Up

The one last is going to be atached under half way.
Now get a foot long piece of string and make a hole on the
back and make a on the very front. Now get the foot long piece of string and put it through the holes and tie it.

About This Instructable

1,585views

2favorites

License:

More by wvill:the hang glider 
Add instructable to: