Step 1: Table dissection 101
Step 2: Dissection 102
Step 3: Switch wiring
This is also a good time to mount the powerbar. I used two screws and the slots on the underside of the powerbar. I made a template out of cardboard to find where to drill the holes for the powerbar.
Step 4: Mounting the hd
Once I found a good place for the hd and it's power supply, I cut two strips of All Round and secured it down using some screws.
Step 5: Mounting the router
Step 6: Securing chargers
I had my phone charger, router power supply, iPod charger (more on that later) and my macbook charger. Because I move my macbook around alot I didn't want to have it's charger fixed on the table which would require some upside down unscrewing. To solve this I put the charger under the cord for the power bar and made a tab out of All Round to hold the opposite side. To remove the charger now I just have to slide the tab over.
I added a set of All Round hoops to hold the excess cable from the macbook charger. The wire slides in and out nicely.