With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
first make the draw of an mobile arlequin all the parts separated. Legs, arms, shoes... and the monocycle. Then mark those templates on an mdf. a 3m...
cut all the templates with a jig saw. I use a stool thats have a hole at the center to sopport my cuts. And do it safely using gogles
cut a rectangle of a wide mdf and glue the sneakers of the arlequin.
i had a wooden wheel from a diferent proyect and i cut it in half. I sanded and glue it between the two wheels of the arlequin. make sure of pressin...
i did a similar thing with the pedals (cut it in half)
cut the templates o a wide and thin mdf I attached the seat using a cheap drill (You can use a DREMEL brand drill) before nail it to the body of the ...
Put glue before insert the stick. I painted the wheel while the glue dries. After it dried a carved both sections of the wheel where the axes goes.
paint the seat and the axes before insert the wheels. then insert the wheel and glu the other axe.
Make a hole on each center of the pedal axles and glue them at both sides of the center of the wheels, be sure to the directions ... one going up and...
i use paper clips that i opened and cut in half. I curl the ends with a plier For the pedals i put a plastic part. I dont know its real name or use...
using the drill (same as a DREMEL brand) i made some holes in a balls. I had it before, for necklaces. And do holes at the hands and legs of the arleq...
Remove these ads by
Signing Up
Not NiceInappropriateSpam2,304 views
6 favorites
Posted:
Nov 28, 2010
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »