using Solar Cells, To make Glass frame DIY Solar Panel

 by EARTHFORSOLAR

Step 3: Laying the solar cells in the GLASS, FOR YOU DIY SOLAR PANEL

Picture 157.jpg
In this step we have the rows of soldered solar cells in series. I take the rows lay them down with opposite ends, the rows will still be all in series.  So lets say one row, the top, may be pos+ and the next row the top may be neg - and so on.  Then they are siliconed down so they stay put when the silcone is set up.  You can connect all your rows in series with bus wire 5 mm wire 
What is tab and bus wire used for ?
http://sites.google.com/site/earthforsolar/what-is-tab-and-bus-wire-used-for


More websites on making solar panels check out my link page
Here are some helpful links I've found that may be helpful to you.
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!