Print PDF
Favorite
Email
Step 5FREE ENERGY The finished DIY Solar panel
In this step I am showing my finished panel out in the sun. Putting out power
it has a open volt reading of 19.5 volts and amps over 3.10 amps
so this panel came out nice and is sealed good from rain and snow.
I have more Free help on my diy solar panel E-Book all free
If your looking for solar cells i have them on my website and more help web sites i have found
I am going to try to have some video this summer with running some nice size motors.
I am working on making another wood frame solar panel to see if i can get it sealed as good as the glass. I may make an instructable on it.
I hope some of this helps
David at www.solarcells101.com
it has a open volt reading of 19.5 volts and amps over 3.10 amps
so this panel came out nice and is sealed good from rain and snow.
I have more Free help on my diy solar panel E-Book all free
If your looking for solar cells i have them on my website and more help web sites i have found
I am going to try to have some video this summer with running some nice size motors.
I am working on making another wood frame solar panel to see if i can get it sealed as good as the glass. I may make an instructable on it.
I hope some of this helps
David at www.solarcells101.com
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Jan 27, 2012. 11:53 AMearthwindwater
says:
Curious... With two sheets of glass like that, do you have any issues with heat? Is your output still good in the middle of the day?
Reply
 |
Add Comment
|
