Instructables

Very strong hand gun

This handgun has a 40-100 foot rang (to get 100 feet or more you need a lot of rubber bands. (I have so many on I can hardly draw it back), it is 11 inches long and very accurate.
 
Remove these adsRemove these ads by Signing Up

Step 1: The Barrle

You will need
2 long gray rods
8 yellow connectors
18 white circles
1 white rod
1 orange connector
2 gray connectors



Put the 8 yellow connectors on the 2 gray rods
Then put 7 white circles on the gray rods
Then the trigger, 1 orange peace and 1 white rod
Then put 11 more white circles on the gray rods
Then put 1 gray connector at the end or the gray rods
You are finished the barrel it should look like the photo above


Step 2: Handle X2

You will Need 3 yellow rods
3 Orange connectors
10 spacers
The photo above should be able to help you put it together

Step 3: Firing Pin

You will need 1 gray rod
1 orange connector
1 peace of tape
The photo will help you put it together

Step 4: Out Riggers

You will need 1 white rod for each
1 orange connector for each
The photo will help you put it together

Step 5: Assemble

Put the firing pin into the barrel
Slide on the handles
Put on out riggers
Put on site
When you are dune it should look like the photo about


Note, place the rubber bands on equally from the top and the bottom or the firing pin will brake!!!!!!!!!!!!!!!!!!!!!!
1-40 of 145Next »
MisterVader5 years ago
This is positively the most powerful and inaccurate knex gun I've ever built in my entire life...
You havn't build a lot of things in your life, eh?
Pat Sowers (author)  TigerNod5 years ago
this may not be the best ever but its still strong you know? and when you think about it any gun on instructables could be the strongest. think about where the power comes from.as long as the kenex gun can take the force you can use more and more rubber bands to get power. nobody on this site can say "i have the strongest" it comes down to the shooter and the power him/her wants to use.
well it seems like you can't build anything so just shut up @!$%*&@!@*#%
sorry that i let me go............ @$%!*&$@# sorry wha ha ha ha
Pat Sowers (author)  MisterVader5 years ago
haahh this was top of the line tech back in the day lol. you know how old this is?
wow, over a year and a month! BY 2 DAYS!!!
wham398375 years ago
that is utter rubbish
MI66 years ago
v
MisterVader MI65 years ago
???
T.E.A.6 years ago
looks like the shatter gun
Pat Sowers (author)  T.E.A.6 years ago
what the heck is that? BTW this instructable is verry old. (not a copy)
the shatter gun is a bad gun by pakman, this is better tho
im sayin looks like it i didnt say it was a copy of it, i havent made it so idki was just puttin in my 2 cents
plasmaspy6 years ago
plasmaspy's super knex compound bow comin soon!
untitled.bmp
Like "plasmaspy" said, to improve it just add blue spacers in between the white circle connectors, and the gray half circle connectors that will lengthen it and cut the friction in half!!!
plasmaspy6 years ago
nice gun im gonna mod it to make it more powerful XD (put blu spacers between all the conncetors on barrel so that it takes away almost all the fiction when it is shot.)
CJ Pain6 years ago
not really that powerful but looks good
zachjm CJ Pain6 years ago
Nah, If you put like 3 rubberbands on it like I did, It is the most powerful gun I had ever made. I just wish somebody could modify it to keep the strength ans have a true trigger.
Pat Sowers (author)  CJ Pain6 years ago
this was 3/4ths a year ago what can i say?
krazykitty6 years ago
umm, I really don't get how to shoot it, Theres no way to hold it in place, could you help me? Thx
Pat Sowers (author)  krazykitty6 years ago
what is "it"
thx i made my own design, you connect the middle of the orange connector to the gray rod, then connect white rods on both sides of the orange connector so it doesn't go past the spot where you want it to cock. after that you put three rubber bands connected to it from the handle so it will go back to it's original position, i think it might even work a bit better! Thanks for the instructable.
i made this and its one of the most powerfull guns i ever made made a massive dent in my cabinet!
OMG! I GOT TO MAKE THAT GUN!!!!!!!!!!!!!! xD
Pat Sowers (author)  the inventor6 years ago
thats because its simple.
musclecar36 years ago
The last part about the gray connecter it not even on your picture thats not being very helpful to building this part.
Pat Sowers (author)  musclecar36 years ago
this is a over a year old and i dont have it around now, so i cant fix it. the people on this site are smart enough to find out where the gray parts go.
FSM6 years ago
If I dont hold the barrrel of my pistol it shoots way up because of recoil. I might add another handle like yours.
Gun Dude6 years ago
Great gun
KILLERK6 years ago
SR-v1 coming soon!
danfog7 years ago
It's Duct Tape. Stops the gun from falling apart
Pat Sowers (author)  danfog7 years ago
just the fireing pin
i made a lot stronger firing pin because on mine the orange connector would always come off when i pulled the firing pin back. to make it you tape the orange connector to the grey rod (or black; whatever), and then snap on 3 grey connectors, and tape over them. but you probably figured that out already. lol
Pat Sowers (author)  koolkidd6 years ago
what range did you get it to?
not sure how far. i shot it through a can though. it went all the way through, made a hole in my wall, and bounced about 10 feet away and i lost the bullet. i found it later though.
Pat Sowers (author)  koolkidd6 years ago
LOL
I made a rifle that has a true trigger, scope, and bipod. It shoots really well. Im making an instructable, and i have all the info, but my camera broke and i cant put on the pictures yet...
Pat Sowers (author)  koolkidd6 years ago
yup... ive done that but i never said nothing.
koolkidd6 years ago
AWESOME gun!!!!!!!!!!
1-40 of 145Next »