very strong hand gun

Step 5 Assemble

Put the firing pin into the barrel
Slide on the handles
Put on out riggers
Put on site
When you are dune it should look like the photo about


Note, place the rubber bands on equally from the top and the bottom or the firing pin will brake!!!!!!!!!!!!!!!!!!!!!!

Comments

[krazykitty]

umm, I really don't get how to shoot it, Theres no way to hold it in place, could you help me? Thx

[Pat Sowers]

what is "it"

[krazykitty]

thx i made my own design, you connect the middle of the orange connector to the gray rod, then connect white rods on both sides of the orange connector so it doesn't go past the spot where you want it to cock. after that you put three rubber bands connected to it from the handle so it will go back to it's original position, i think it might even work a bit better! Thanks for the instructable.

[F-zero]

This is a really cool looking gun, only problem is, I'm not sure where the peices come from or where to put the rubberbands and what fires from it exactly? Some clarification would be nice,

[Pat Sowers]

ok i dont know what peices your talking about, for the rubber bands You start from under the outriggers and stretch back under the gun to the firing pin. Then you take more rubber bands and you put them on starting from the top of the first white circle along the top of the gun to the firing pin, and the gun fires whatever fits in the barrel ex:(knex, BB)

[Pat Sowers]

Sorry about that. The rubber bands are to be placed evenly between two places. The first place is right under where the outriggers and the gun barrel come together stretching all the way back to fit in the end of the orange connector on the firing pin. The second place is at the front part of the gun where the white circles begin on the barrel stretching back to the same place as before. (The tan colored rubber band in the photo was just there for some looks) Also for your other Question the parts that came out of nowhere are for a mod that i made that are not important to the power of this gun.

[gerrard08]

im havin a hard time figurein out where the rubber bands go, + theres some pieces that came out of nowhere so can you please clarify a bit more...im almost done that's why