Introduction: Paper Finger Snowboard

Picture of Paper Finger Snowboard

look like
sorry about blurry pictures..

Step 1: Items You Need

Picture of Items You Need

1. aluminum foil
2. thick paper (construction paper works fine)
3. double sided tape
4. scissors
5. electrical tape (optional)
6. markers (optional)

Step 2: Step 1

Picture of Step 1

first take the paper and draw a snow board shape on it. you may add designs to it also.

Step 3: Step 2

Picture of Step 2

now cut out the snowboard.

Step 4: Step 3

Picture of Step 3

now, use the double sided tape on the cut out snowboard and stick it on a piece of thick paper

Step 5: Step 4

Picture of Step 4

now cut it out, again

Step 6: Step 5

Picture of Step 5

now stick your finger on a piece auminum foil, and measure it

Step 7: Step 6

Picture of Step 6

now make it into a boot and repeat steps 6 and 7 and then tape it to the board!
(blurry pics) sory!

Comments

krazipanda (author)2009-10-14

this idea is certainly...... unique.....

About This Instructable

2,732views

0favorites

License:

More by guitargod14:paper finger snowboardMaking a guitar pick out of credt cards
Add instructable to: