Introduction: Window Table

Picture of Window Table

Step 1: Step 1

Sand everything

Step 2: Step 2

The second step is to get the glass out of the window.For me it was not so easy, I tried different ways.
One was to take of the putty. The other option is to saw the window frame in pieces.
You need the frame for the legs.
 

Step 3: Step 3

Saw the window frame in 2 for the legs of the table. 

Step 4: Step 4

Picture of Step 4

Choose the height of the legs. I saw them a little bit smaller and used the rest material for corners.

Step 5: Step 5

Picture of Step 5

For stability I put the glass in between the legs.
First you measure the glass and think where you want to have the glass.
Saw a line (for me it was 1cm deep) in the legs.
 

Step 6: Step 6

Picture of Step 6

Now it's time to put everything together. screw the corners on the window and then on the leggs.You can put the glas in between the legs and you are done.

Comments

About This Instructable

2,316views

18favorites

License:

More by Selma_wdka:window table
Add instructable to: