Print PDF
Favorite
Email
Step 3Rubber surgury
From my rough cut piece of the blade we're going to need to trim that profile down a bit. Grab a sharp knife and start at one end and simply slice down the length of the blade to trim off the smaller underside portion of the blade. We're doing this so it sits flatly on the glove and won't wobble around so much.
Again every wiper will be a little different, but should all be roughly the same, so if yours doesn't look just like this don't worry, just trim down what you can so you have a nice solid base for your wiper to sit flat on your glove.
Again every wiper will be a little different, but should all be roughly the same, so if yours doesn't look just like this don't worry, just trim down what you can so you have a nice solid base for your wiper to sit flat on your glove.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
