Print PDF
Favorite
Email
Step 8Arduino board
The Board
The Arduino now needs the inputs, outputs, power connections and grounds attaching.
The wiring diagrams are in the images below of the whole wiring set-up and also one of the stripboards, and the photos have notes on them to show how this corresponds with the actual board.
We are using 3 analogue inputs from the pots and 6 digital outputs to the stripboards, with pulse width modulation (pwm). There are 3 grounds coming back to the board from the 3 stripboards.
There is 3v power from one supply to the 3 stripbaords, and 7.5v power to the arduino board from another power supply.
The Arduino now needs the inputs, outputs, power connections and grounds attaching.
The wiring diagrams are in the images below of the whole wiring set-up and also one of the stripboards, and the photos have notes on them to show how this corresponds with the actual board.
We are using 3 analogue inputs from the pots and 6 digital outputs to the stripboards, with pulse width modulation (pwm). There are 3 grounds coming back to the board from the 3 stripboards.
There is 3v power from one supply to the 3 stripbaords, and 7.5v power to the arduino board from another power supply.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
