Step 5: Speaker
To allow your sounds to be heard create openings in the hobby box. I was able to fit both speakers between the potentiometers to let the sounds transmit through small openings in the lid, located under the decks.
Create openings in the lid near each potentiometer knob to pass wires from the underside of the deck through to the circuit board.
Create openings in the lid near each potentiometer knob to pass wires from the underside of the deck through to the circuit board.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
