Introduction: X1000 Avenger Sniper Rifle V1

this instructable shows you how to make my x1000 avenger sniper rifle v1 its a sling shot with a new trigger system it gets about 130 feet of range.

Step 1: Ammunition

this step shows how to make the ammunition.

Step 2: Barrel

this step shows how to make the barrel.

Step 3: Barrel Support

this step shows how to make the barrel support so it wont snap.

Step 4: Trigger

this step shows how to make the trigger and connect it to the barrel.

Step 5: Stock/handle

this step shows how to make the stock/handle.

Step 6: Rubber Band Catcher

this step shows how to make the rubber band catcher.

Step 7: Rubberbands and Rubber Band Mounting

this step shows the rubber bands and rubber band mounting.

Step 8: Loading and Cocking

this step shows how to load and cock my gun.

Step 9: Warning!

do not use more the one rubberband on this gun it will break the trigger.p.s have fun shooting!

Comments

author
knexgunbuilder217 (author)2012-06-26

can i turn this into a pistol

author
knexgunbuilder217 (author)2012-06-26

will there be a parts count on this

author
knexrule2012 (author)2012-02-19

hey, can i possibly use this mech in one of my future guns???

author

you bet.

author

thanks:) i'll get to work

author
Football viking boy (author)2011-04-02

Thank you so mush for an easy step!!! =)

author
STUNTMANIC101 (author)2011-01-21

How many peices long is this part

author

Thanks I can final start building this thing

author

You're welcome

author
STUNTMANIC101 (author)2011-01-24

Owwwwwwwwww my fingers

author

Sorry.

author
STUNTMANIC101 (author)2011-01-24

Not true I have three and two are really strong bands

author

Just a safety precaution, Don't want anyone getting hurt. Mine could only take one #64.

author
NJL4JC (author)2011-01-10

Cool.

author
slimshaddy (author)2010-12-03

i mean the part that connects to the supports

author
slimshaddy (author)2010-12-02

what are some pieces that i can substitute because i only have 26 yellow connectors and 13 orange connectors.

author

the handle and the stock don't have to be made either, and I suppose you could skeletonize the barrel

author

You don't have to put the orange connectors on the bottom of the barrel, BUT YOU MUST PUT BLUE RODS IN THEIR PLACE!

author
slimshaddy (author)2010-12-02

do you have to make the second part of the barrel

author

what do you mean by the second part of the barrel, please tell me what you mean.

author
slimshaddy (author)2010-11-30

how far does it shoot

author

I don't have it anymore, probabley 70 feet

author

k thanks read my next message

author
ronan1999 (author)2010-10-12

can you guys make a small one pretty please i dont have that many peices

author

maybe, I was planning on doing something like that eventually.

author
PieMaster777 (author)2010-07-11

hmmmmmmm, can u post more pics this is difficult lol jk

author

Ya what r those peices

author

Ya what r those peices

author
PieMaster777 (author)2010-07-11

THANK JESUS for the ammo, now i wont lose all of my tan clips, now i can use them for...........clipping.....yea

author
KnexFreek (author)2009-10-12

i agree with hiyadudez but i give any and every new type of knex gun 5 stars so i rated 5 stars

author

Thanks.

author
Hiyadudez (author)2009-09-13

Sorry, but that is a horrid stock.

author

I know.

author

Did you run out of peices?

author

No I was just in a hurry.

author

Oh right.

author
An Villain (author)2009-04-08

sharpen the orange rod and it goes into a 2x4 at about 5 feet.

author

cool!

author

yes.

author
dracoshadex (author)2009-04-16

will a small engine band work innstead of the rubber band

author

no.

author
remington maika (author)2009-08-30

you could at least tell us what parts you need.

wanna gear... pt.2.gif
author
therandomperson (author)2009-03-15

You do know that your gun is just a direct copy of the Darth Geko Man's sniper? all youve done is added on a different butt and took off the handles

author

no it isnt! it is a rail system not a low friction barrel and I invented that trigger.

author

yu wish.

author

I know. 1st pic is my barrel and my trigger 2nd pic is dgms barrel and his trigger.

FZZ8G6EFOVX0YMJ_MEDIUM.jpgFR5U7DXFOWZOB1F_MEDIUM.jpg
author

theres still a corralation...

author
yannyboy (author)therandomperson2009-05-18

theres still a stupid kid called thersndomperson

author
therandomperson (author)yannyboy2009-05-18

haha stop calling yourelf stupid.

About This Instructable

4,616views

5favorites

License:

Bio: none of your business
More by Knex_Gun_Builder:Black Mamba sniper RifleKnex High Power Pistol.p.k.c.b v2
Add instructable to: