Picture of x1000 avenger sniper rifle v1
Picture 184.jpg
this instructable shows you how to make my x1000 avenger sniper rifle v1 its a sling shot with a new trigger system it gets about 130 feet of range.
Remove these adsRemove these ads by Signing Up

Step 1: Ammunition

Picture of ammunition
this step shows how to make the ammunition.

Step 2: Barrel

Picture of barrel
Picture 191.jpg
Picture 194.jpg
Picture 193.jpg
Picture 203.jpg
this step shows how to make the barrel.

Step 3: Barrel support

Picture of barrel support
Picture 190.jpg
Picture 205.jpg
this step shows how to make the barrel support so it wont snap.

Step 4: Trigger

Picture of trigger
Picture 204.jpg
this step shows how to make the trigger and connect it to the barrel.

Step 5: Stock/handle

Picture of stock/handle
Picture 206.jpg
Picture 211.jpg
Picture 210.jpg
Picture 201.jpg
Picture 202.jpg
this step shows how to make the stock/handle.

Step 6: Rubber band catcher

Picture of rubber band catcher
this step shows how to make the rubber band catcher.

Step 7: Rubberbands and rubber band mounting

Picture of rubberbands and rubber band mounting
Picture 207.jpg
this step shows the rubber bands and rubber band mounting.

Step 8: Loading and cocking

Picture of loading and cocking
Picture 214.jpg
this step shows how to load and cock my gun.

Step 9: Warning!

do not use more the one rubberband on this gun it will break the trigger.p.s have fun shooting!
1-40 of 91Next »
can i turn this into a pistol
will there be a parts count on this
hey, can i possibly use this mech in one of my future guns???
Knex_Gun_Builder (author)  knexrule20123 years ago
you bet.
thanks:) i'll get to work
Thank you so mush for an easy step!!! =)
How many peices long is this part
Knex_Gun_Builder (author)  STUNTMANIC1014 years ago
Thanks I can final start building this thing
Knex_Gun_Builder (author)  STUNTMANIC1014 years ago
You're welcome
Owwwwwwwwww my fingers
Knex_Gun_Builder (author)  STUNTMANIC1014 years ago
Not true I have three and two are really strong bands
Knex_Gun_Builder (author)  STUNTMANIC1014 years ago
Just a safety precaution, Don't want anyone getting hurt. Mine could only take one #64.
NJL4JC4 years ago
slimshaddy4 years ago
i mean the part that connects to the supports
slimshaddy4 years ago
what are some pieces that i can substitute because i only have 26 yellow connectors and 13 orange connectors.
Knex_Gun_Builder (author)  slimshaddy4 years ago
the handle and the stock don't have to be made either, and I suppose you could skeletonize the barrel
Knex_Gun_Builder (author)  slimshaddy4 years ago
You don't have to put the orange connectors on the bottom of the barrel, BUT YOU MUST PUT BLUE RODS IN THEIR PLACE!
slimshaddy4 years ago
do you have to make the second part of the barrel
Knex_Gun_Builder (author)  slimshaddy4 years ago
what do you mean by the second part of the barrel, please tell me what you mean.
slimshaddy4 years ago
how far does it shoot
Knex_Gun_Builder (author)  slimshaddy4 years ago
I don't have it anymore, probabley 70 feet
k thanks read my next message
ronan19994 years ago
can you guys make a small one pretty please i dont have that many peices
Knex_Gun_Builder (author)  ronan19994 years ago
maybe, I was planning on doing something like that eventually.
hmmmmmmm, can u post more pics this is difficult lol jk
Ya what r those peices
Ya what r those peices
THANK JESUS for the ammo, now i wont lose all of my tan clips, now i can use them for...........clipping.....yea
KnexFreek5 years ago
i agree with hiyadudez but i give any and every new type of knex gun 5 stars so i rated 5 stars
Knex_Gun_Builder (author)  KnexFreek5 years ago
Hiyadudez5 years ago
Sorry, but that is a horrid stock.
Knex_Gun_Builder (author)  Hiyadudez5 years ago
I know.
Did you run out of peices?
Knex_Gun_Builder (author)  Hiyadudez5 years ago
No I was just in a hurry.
Oh right.
An Villain6 years ago
sharpen the orange rod and it goes into a 2x4 at about 5 feet.
Knex_Gun_Builder (author)  An Villain5 years ago
1-40 of 91Next »