Introduction: X80g Assault Pistol

Picture of X80g Assault Pistol

hello this is my new pistol that i made its slide action and its realy cool enjoy!

Step 1: Hand Gaurd/decoration

Picture of Hand Gaurd/decoration

this part isnt realy important but it makes the gun look alot cooler and more suported.

Step 2: Handle and Trigger

Picture of Handle and Trigger

make from pick

Step 3: Barrel

Picture of Barrel

make from pick

Step 4: Make the Bolt

Picture of Make the Bolt

make from pick...

Step 5: Make the Slide

Picture of Make the Slide

make from the picture carefuly dont mess up on this step.

Step 6: Putting It Together

Picture of Putting It Together

put it all together. again dont mess up on this step

Comments

patxxx5 (author)2009-04-25

were do the elastics and bullets go

jaydude1234 (author)2009-03-01

its hard!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!i cant make it

oodalumps (author)2007-09-25

Why have a slide without a magazine/hopper?

Yeah that is what i think, if anything it probably takes longer to cock and reload.

man did u read anything! tis nearly imposible to do that but u could do it if u break som peices but tehrs no way in hell that im ganna do that

oodalumps (author)gunmanx2007-09-26

I've already made one without breaking any pieces. Far from impossible.

gunmanx (author)oodalumps2007-09-26

ok braniack lets see it and dont even say taht u lost ur camera or som dumb bull crap like that.......

oodalumps (author)gunmanx2007-09-26

No handle and a block trigger. But it's a slide action with a hopper. Enjoy.

oodalumps (author)oodalumps2007-09-26

Oh yeah, because I know you'll complain about how it doesn't have a handle or trigger:

kirdaiht (author)oodalumps2007-10-10

post it

DrWeird117 (author)kirdaiht2009-01-09

Um.....no.

Hehehehe!!

gunmanx (author)oodalumps2007-09-28

lol i wasent going to complain i just needed to see a mecanism of it but wat i was trying to do was creat a mag for MY pistol sinse it has a small size i dont think its posible it might be but idk well thanks for posting this its kool

oodalumps (author)gunmanx2007-09-28

If you flip the barrel over, you could replace the front half of the gun with a bottom loading magazine. It would look quite nice too.

gunmanx (author)oodalumps2007-09-28

sweet

gunmanx (author)oodalumps2007-09-25

fine u try making one buddy and after tell me how easy it was

Whaleman (author)gunmanx2007-09-25

He already made two kinds of MGs (which will be the only two kinds there are until I modify my semi into an MG) , what more do you want?

gunmanx (author)Whaleman2007-09-25

u missed my point

Whaleman (author)gunmanx2007-09-25

Yeah, I am good at pissing people off.

gunmanx (author)Whaleman2007-09-25

lol

oodalumps (author)gunmanx2007-09-25

You know I of all people could easily make one.

gunmanx (author)oodalumps2007-09-25

ok u not me man it would take me a long time to think of a mag for this thing i already spent about a month thinking of one for this then i gave up....

gunmanx (author)bradleyJOHN2007-10-20

hmmmm looks interesting how doz it work?

Whaleman (author)2007-09-24

pics are kinda blurry, and it is not very new, but cool none the less!

adamsdead (author)Whaleman2007-09-25

its been done

Whaleman (author)adamsdead2007-09-25

yeah, I know, I was trying to be nice.

Mepain (author)Whaleman2007-09-26

"Trying" lol.

gunmanx (author)Mepain2007-09-28

.....

Whaleman (author)Mepain2007-09-26

trying yes....... trying....... (-.-)

gunmanx (author)adamsdead2007-09-25

unlike ur other pistol

adamsdead (author)gunmanx2007-09-26

wich i deleted and i realize it was hard to load and stuff but with 1 rubberband i shot ==through== card board

gunmanx (author)adamsdead2007-09-26

yea i no it was a good pistol disign and all but u were stuiped enough to call it a crossbow and even stuipeder to say a crossbow means no firing pin rofl

adamsdead (author)gunmanx2007-09-27

yeah i know :(

gunmanx (author)adamsdead2007-09-28

lol

gunmanx (author)adamsdead2007-09-25

so its still awsome

gunmanx (author)Whaleman2007-09-25

i have to use a web cam can use digital cam or my mom gets mad :/

Whaleman (author)gunmanx2007-09-25

oh.

Flie-Ing GOOse (author)2007-09-25

no dave

gunmanx (author)Flie-Ing GOOse2007-09-25

??

Flie-Ing GOOse (author)gunmanx2007-09-26

dunno, just felt like sayin it, nout personal lol

gunmanx (author)2007-09-25

o and if u say its not new just think the ap2 slide has lots of exotic parts and uses alot of parts and the deseret buzzard usses a hell of alot of peices

zwempie (author)2007-09-25

I have Made it and I like it :)

T-man (author)2007-09-25

sweet!!!!

Vynash (author)2007-09-24

cool im gonna build

About This Instructable

6,527views

6favorites

License:

More by gunmanx:x80g assault pistolknex tech 9thunderbolt rbg
Add instructable to: