Instructables

Xbox 360 console controller game and guide / magizine stand

Picture of xbox 360 console controller game and guide / magizine stand
This is a stand I made for my xbox 360. On the bottom it holds the 360 in the compartment above is space for game guides or magazines. above the magazine holder is the a shelf to hold16 games this can be changed by adding or subtracting layers. on the very top is a controller holder the top can hold 1-3 controllers and a wired headset in the very back.
parts
rods
green 60
white 51
yellow 127
blue 77
red 32

spacers
gray 20
blue 4

connectors
white 26
red 30
yellow 23
green 6
purple 107
blue 62
light gray 6
dark gray 70
orange 12

parts without doors on front
rods
green 52
white 41
yellow 127
blue 69
red 30


connectors
white 16
red 22
yellow 15
green 6
purple 107
blue 62
light gray 6
dark gray 70
orange 8
 
Remove these adsRemove these ads by Signing Up

Step 2: Magazine holder

Picture of Magazine holder
IMG_0041.JPG
IMG_0038.JPG
IMG_0042.JPG
IMG_0043.JPG
IMG_0044.JPG
1 this is the top part of the mag holder it will be added on top of the console compartment
2 add these to the under side
3 this is the door for the mag holder
4 attach the top using the blue rods
5 the 2 grey connectors are added to the 2 blue rods to add support
6 attach the door to the mag holder
parts

rods
green 8
white 11
yellow 9
blue 21
red 4

connectors
white 2
red 16
yellow 5
purple 13
blue 11
orange 2

godswrath302 years ago
could anyone post a link to a download for the PDF file, im moving soon and don't have time to build it yet and i wot have internet for a while when i arrive so it would be nice. thanks.
The ironman3 years ago
i need to mod it but all in all great
mford lee3 years ago
i love my 360 holder its great 5*
Khaos Noble3 years ago
Pretty sweet! this is A LOT sturdier than the stand i made a couple years back. Great job! Keep up the good work! :)
assassin1321 (author) 5 years ago
this is my first instructable so if there any questions just ask and ill be sure to get back to you as soon as possible
could u use this on a ps3
Yea, your first Q tight here. I have a lot of k'nex and and might think of building this for my friends birthday and giving it to him. In other words... Piece count?
assassin1321 (author)  ravilis5 years ago
there you go one parts list also a parts list for each step hope it helps
say u only had 1 game how do u get it out
Why, do you only have one game? Shu, Get a life.
you would only make one game rack thingy. but that also means that you can't make the door.
assassin1321 (author)  mrmoneybagss5 years ago
you can ud just need to get creative
assassin1321 (author)  skyer695 years ago
what do you mean exactly
Knex Guru5 years ago
I normally would never call anyone out on something like this, but this looks uncannily similar to the same thing I made and published about a year before you ...
It is different, and slideshows don't count.
Yes it's different, but only slighlty. And yes slideshows do count.
slideshows do not count instructables do.
You're not a very bright person are you.
I actually am a very bright person, slideshows do not count as instructables, if you did post it as an instructable before he did then it would be copying.
You're right posting pictures of something I made only to have someone post an instructable of it a year later isn't copying.

I don't see the logic there.
seriously, what license did you use? Attribution Non-commercial Share Alike (by-nc-sa) by by by This license lets others remix, tweak, and build upon your work non-commercially, as long as they credit you and license their new creations under the identical terms. Others can download and redistribute your work just like the by-nc-nd license, but they can also translate, make remixes, and produce new stories based on your work. All new work based on yours will carry the same license, so any derivatives will also be non-commercial in nature.
I wouldn't have a problem if I had gotten any credit at all. But I didn't so I was calling the creator out on it until you jumped in to defend him.
Ooooooohhhhhhhh! Ooooooohhhhhhhh! Ooooooohhhhhhh!
assassin1321 (author)  Knex Guru5 years ago
look i built it then i checked the site to see if there were any posted and all i saw was urs and it wasnt a instructable and people couldnt easily build it off the slide show so i posted what i had made
I don't have a problem with that if I had gotten credit.
assassin1321 (author)  Knex Guru5 years ago
mine is diffrent in a few things but people cant build it easy from ur slide show so i posted it
Knex Guru4 years ago
I'm very glad you posted something similar to mine, I'm much to lazy to make an instructable and now people can make it.
bartluke4 years ago
what size rods = the size of the door?
assassin1321 (author)  bartluke4 years ago

the one with the grey spacers is red

dude, i just built this thing and it is AWESOME!!!!!! Thanks:)
dude this rocks. i was just about to make my own and i really didnt want to. and this even holds mags, games, and controllers!!!! 5 stars
I am confused you were going to make a cabinet but you didn't want to whats up with that???
mage4 years ago
hey, this is pretty cool 
Bartboy5 years ago
Sweet! Nice pics! But does it make the xbox overheat at all?
assassin1321 (author)  Bartboy5 years ago
mine never did
s0lekill3r5 years ago
Thanks for posting instructions, I'm an avid 360 gamer as well.
assassin1321 (author)  s0lekill3r5 years ago
no problem and that break action shotgun of yours is cool too
Thanks.
DJ Radio5 years ago
This is awesome. 5*