This is a stand I made for my xbox 360. On the bottom it holds the 360 in the compartment above is space for game guides or magazines. above the magazine holder is the a shelf to hold16 games this can be changed by adding or subtracting layers. on the very top is a controller holder the top can hold 1-3 controllers and a wired headset in the very back.
parts
rods
green 60
white 51
yellow 127
blue 77
red 32
spacers
gray 20
blue 4
connectors
white 26
red 30
yellow 23
green 6
purple 107
blue 62
light gray 6
dark gray 70
orange 12
parts without doors on front
rods
green 52
white 41
yellow 127
blue 69
red 30
connectors
white 16
red 22
yellow 15
green 6
purple 107
blue 62
light gray 6
dark gray 70
orange 8
parts
rods
green 60
white 51
yellow 127
blue 77
red 32
spacers
gray 20
blue 4
connectors
white 26
red 30
yellow 23
green 6
purple 107
blue 62
light gray 6
dark gray 70
orange 12
parts without doors on front
rods
green 52
white 41
yellow 127
blue 69
red 30
connectors
white 16
red 22
yellow 15
green 6
purple 107
blue 62
light gray 6
dark gray 70
orange 8
Remove these ads by
Signing UpStep 1: The 360 compartment
1 this is the base of the stand
2 another view
3 this is the top of the compartment
4 put together like so
*note to get the 360 in some of the front peices will need to be removed to make room to slide it in
parts
rods
yellow 50
red 46
blue 10
connectors
white 14
yellow 2
purple 38
blue 10
dark grey 4
2 another view
3 this is the top of the compartment
4 put together like so
*note to get the 360 in some of the front peices will need to be removed to make room to slide it in
parts
rods
yellow 50
red 46
blue 10
connectors
white 14
yellow 2
purple 38
blue 10
dark grey 4
Visit Our Store »
Go Pro Today »
the one with the grey spacers is red
I don't see the logic there.