Step 1: Getting started
ziplock box any size will do,
input plug for your ipod/computer,
hot glue gun,
axzato knife and
paint if you so choose.
if you don't know what a input plug looks like look at the pictures bellow.
2. Now cut the line on the in side of what you traced earlier.
3. Now it is time to do some soldering, okay take two wires and solder one too the positive end of the speaker and one too negative end of the speaker, now take the positive and solder it to the positive end of the input plug and do the same thing with the negative end.
4. You are all most done, now it is time for some installment put the wires in the hole you made earlier then take the hot glue gun and put hot glue around the edges of the hole then put the speaker over the hole to glue it down.
5. Now make another hole right by your speaker and glue in your input plug now.