Jewelry

Check Ball EarringsThe other day I was waiting on my wife and daughter while they were trying on clothes at Kohls. I decided to look at the jewelry for some ideas. This design was among the earrings however, they were made from gold wire and oyster pearls. Gold and pearls? Don’t have em’. Paper clips and a busted aut... read more »

Zinc & Copper PendantThis is what you get when you hammer air gun BB’s in to a penny and then polish off the copper to show the zinc. To do it: Place several BB’s between two pieces of aluminum tape. Lay a penny over the tape and cover it with another piece of tape. Hammer the BB’s into the penny. Remove the penny fr... read more »

Origami Paper CorsageAhhh...Spring is in the air and we are rapidly entering the season of Prom. While you're busy stressing who you'll go with, or what your dress will look like - never fear. I've got the corsage covered.  ...but srsly LOLZ omg i hope that boi frm homeroom askz you 2 ~!pRoM!~ DU U TINK HE WULL?!?! ... read more »

Silver Heart PendantThis heart shaped pendant first started off as a 1963 Canadian Silver Dollar. It was about 80-20 silver to copper. The rough shape was made using the lost wax technique and after hours of filing, sanding and polishing the final product was finished. It was made for my gf for our anniversary. Wax S... read more »

Steel Butterfly PendantThis pendant is made by hand with out the use of measurements. Meaning, you start out by drawing what you want and take that directly to the metal. While researching this I realized butterfly wings have so many different shapes. After looking at a bunch, these wings are my interpretation of what the... read more »

.223 Ammo PinI’m not a gun nut but I still think this pin is cool. I put it on my camping bag but you could put it on a hat, jacket, or make it a tie tack. Just don’t take it through an airport =). To make it: Use an expended cartridge. That means a bullet that has already been shot. Do not under any circumsta... read more »

Woven Ring PendantThis pendant is composed of 7 wire rings, not including the jump ring. The rings are linked by mobius weave which means every ring passes through the others. More information for mobius weaving can be found here. I got 25’ of 16 gage wire from a home improvement store for less than $2.00. You could... read more »

Creating a two tone engagement ringHere's how I made a two tone Gold and Platinum engagement ring start to finish. In this particular ring the center stone is a Diamond, the bezel is Platinum and the ring shank is 18k rose Gold. The ring shank is carved in wax and is cast using the lost wax process and the bezel is formed from flat s... read more »