With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
IPAD 7 - Insanely Powerful Arrow Driver
Scrambled eggs like a boss
Thanks!The project should work with any servo having sufficient torque. Using different motors will require changes in the electronics, hardware and code to make them work. How much is dependent on how similar the motors and encoders are to the ones originally selected. Other servo motors will also work depending on how much of the project you would like to modify.
The encoder CPR influences the angular resolution of the plate. I'm not really sure how much lower you can go before adverse results are noticed. Any brand quadrature encoder, that fits the selected motors, should work with high CPR. The code will also have to be adjusted for different CPR.
Those should work!
Thanks!If the motors are designed for brushless gimbal camera stabilizers they should work. This kind of motor is not the same as the ones used for spinning a propeller. The 2208 motors typical are in the range of 80-100 KV.
Join 2 million + to receive instant DIY inspiration in your inbox.
© 2016 Autodesk, Inc.