loading
2Comments

Tell us about yourself!

Complete Your Profile
  • AmirE13 commented on EdDruino's instructable Arduino TV-B-Gone5 months ago
    Arduino TV-B-Gone

    Hi all. for those who encountered errors:i had the same problem with all of you, every few lines some error occurs, after a few hours of playing with the code and the libraries and reading the Ken's method (http://www.righto.com/) of coding for hundreds of times, i found that the problem is not the code itself, I've tried fixing every error, changing every port and finally came to this:version 1.0.3 (http://arduino.googlecode.com/files/arduino-1.0.3-windows.zip) of arduino IDE for windows, just uploaded it to my UNO R3 without any errors and it works great. i have used no transistors or resistors, just pinned anode of the IR LED to pin 3 and then grounded the IR LED cathode to GND right next to pin 13. turns every single TV that i have tested so far off, 30 years olds from sony to toshi...see more »Hi all. for those who encountered errors:i had the same problem with all of you, every few lines some error occurs, after a few hours of playing with the code and the libraries and reading the Ken's method (http://www.righto.com/) of coding for hundreds of times, i found that the problem is not the code itself, I've tried fixing every error, changing every port and finally came to this:version 1.0.3 (http://arduino.googlecode.com/files/arduino-1.0.3-windows.zip) of arduino IDE for windows, just uploaded it to my UNO R3 without any errors and it works great. i have used no transistors or resistors, just pinned anode of the IR LED to pin 3 and then grounded the IR LED cathode to GND right next to pin 13. turns every single TV that i have tested so far off, 30 years olds from sony to toshiba and high end samsung TVs.

    Hi all. for those who encountered errors:i had the same problem with all of you, every few lines some error occurs, after a few hours of playing with the code and the libraries and reading the Ken's method (http://www.righto.com/) of coding for hundreds of times, i found that the problem is not the code itself, I've tried fixing every error, changing every port and finally came to this:version 1.0.3 (http://arduino.googlecode.com/files/arduino-1.0.3-windows.zip) of arduino IDE for windows, just uploaded it to my UNO R3 without any errors and it works great. i have used no transistors or resistors, just pinned anode of the IR LED to pin 3 and then grounded the IR LED cathode to GND right next to pin 13. turns every single TV that i have tested so far off, 30 years olds from sony to tos...see more »Hi all. for those who encountered errors:i had the same problem with all of you, every few lines some error occurs, after a few hours of playing with the code and the libraries and reading the Ken's method (http://www.righto.com/) of coding for hundreds of times, i found that the problem is not the code itself, I've tried fixing every error, changing every port and finally came to this:version 1.0.3 (http://arduino.googlecode.com/files/arduino-1.0.3-windows.zip) of arduino IDE for windows, just uploaded it to my UNO R3 without any errors and it works great. i have used no transistors or resistors, just pinned anode of the IR LED to pin 3 and then grounded the IR LED cathode to GND right next to pin 13. turns every single TV that i have tested so far off, 30 years olds from sony to toshiba and high end samsung TVs.

    View Instructable »