loading
2CommentsJoined August 16th, 2016

Tell us about yourself!

Complete Your Profile
  • Smart IOT Cart for Internal Logistics (Intel IoT)

    Thanks for your sharing.Sorry, my english is very bad, but i have question for you:i have an Intel Edison breakout board, i used library same your code, https://drive.google.com/file/d/0B65Xw7I1XCcuVUdFU...my program :#include <SPI.h>#include <RFID.h>RFID rfid(10,5); // Setup variables: int serNum0; int serNum1; int serNum2; int serNum3; int serNum4;void setup(){ Serial.begin(9600); SPI.begin(); rfid.init();}void loop(){ Serial.println("bat dau"); if (rfid.isCard()) { if (rfid.readCardSerial()) { if (rfid.serNum[0] != serNum0 && rfid.serNum[1] != serNum1 && rfid.serNum[2] != serNum2 && rfid.serNum[3] != serNum3 && rfid.serNum[4] !...see more »Thanks for your sharing.Sorry, my english is very bad, but i have question for you:i have an Intel Edison breakout board, i used library same your code, https://drive.google.com/file/d/0B65Xw7I1XCcuVUdFU...my program :#include <SPI.h>#include <RFID.h>RFID rfid(10,5); // Setup variables: int serNum0; int serNum1; int serNum2; int serNum3; int serNum4;void setup(){ Serial.begin(9600); SPI.begin(); rfid.init();}void loop(){ Serial.println("bat dau"); if (rfid.isCard()) { if (rfid.readCardSerial()) { if (rfid.serNum[0] != serNum0 && rfid.serNum[1] != serNum1 && rfid.serNum[2] != serNum2 && rfid.serNum[3] != serNum3 && rfid.serNum[4] != serNum4 ) { /* With a new cardnumber, show it. */ Serial.println(" "); Serial.println("Card found"); serNum0 = rfid.serNum[0]; serNum1 = rfid.serNum[1]; serNum2 = rfid.serNum[2]; serNum3 = rfid.serNum[3]; serNum4 = rfid.serNum[4]; Serial.println(" "); Serial.println("Cardnumber:"); Serial.print("Dec: "); Serial.print(rfid.serNum[0],DEC); Serial.print(", "); Serial.print(rfid.serNum[1],DEC); Serial.print(", "); Serial.print(rfid.serNum[2],DEC); Serial.print(", "); Serial.print(rfid.serNum[3],DEC); Serial.print(", "); Serial.print(rfid.serNum[4],DEC); Serial.println(" "); Serial.print("Hex: "); Serial.print(rfid.serNum[0],HEX); Serial.print(", "); Serial.print(rfid.serNum[1],HEX); Serial.print(", "); Serial.print(rfid.serNum[2],HEX); Serial.print(", "); Serial.print(rfid.serNum[3],HEX); Serial.print(", "); Serial.print(rfid.serNum[4],HEX); Serial.println(" "); } else { /* If we have the same ID, just write a dot. */ Serial.print("."); } } } rfid.halt(); Serial.println("end");}i compiled successfully, and IDE noticed : transfer successfully, but Serial monitor did have ID number when i take a tag on module RFIDcan you solve my problemthanks you.

    Sorry, i have question for you. Can your code run on Intel Edison Breakout Board, and what pin on Edison connect to module RFID

    View Instructable »