Tell us about yourself!
I use SprintLayout there is correction at print dialog. And when You print a sheet becomes a few smaller, You should try print one point one or 2 times, then print Your pcb image. And make correction, If it's need.
Hi all, guys! May be these photos and videos will help anybody: Steam-Laser PCB Techhttps://yadi.sk/d/0wHi7Iv3rDuSoSteam-Laser Technologyhttps://yadi.sk/d/3oYMkHuSrChecBig video from first link, step-by-step guide(with comments (titres only)), other files are not processed videos and photos of other PCB including 2-sided. Real resolution which can be achieved down to 0.1 mm(depends from printer at most) .