With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Paper Mache Class
Anneal the steel before you cut out the profile. It makes cutting and grinding a lot easier.
Beautiful knife. But if you anneal the steel before you cut out the profile. It makes cutting and grinding a lot easier.
You did it the hard way. But the result is beautiful.
This may sound pedantic, but what is the purpose of moving three at a time? Would it more (or less) of a challenge to move one piece at a time?
Boating and CampingView Instructable »
If I could just offer one simple tip. Put a center line on the edge of the wood before you start to grind. It's really easy to do, just use a sharp pencil and your finger tip as a depth gage to mark a line down the middle.
I don't see where you used the ruler to reinforce the handle.
These are called a "throatless shear" because you can cut a line as long as you like without any obstructions. nice job! http://www.harborfreight.com/throatless-shear-38413.html
Looking at those big rocks around this property, I don't foresee this mailbox getting hit by a drunk driver anytime soon.
Here's an idea. Take a second clean bucket and drill a half dozen 1" holes in the side right at the bottom. Then take your wet clothes out of the first bucket, plop them into the second bucket, then place the first bucket into the second bucket and use it to smash all the water out. Of course you'll want to do this outside or in the tub, since the water is going to go everywhere. But it's much faster and easier than the old "twist and shout". =)
LEDs and Lighting Class
I hate to be the one to do this but I read the comments and no one else did so here goes.You're is the contraction of the two words You Are. As in "You're about to do a video on ear gauges."The word you should be using is the possessive, Your. As in, "Is this your ear gauge laying on the floor?"
I don't care what biased "experts" say. Ear candles work. I've used them many times and they are not dangerous. It's simple physics. The reason you have contrary "reports" from medical practitioners is simple, Ear Candles cut into their business and render their expensive equipment and training unnecessary.
The leaning frame makes it stable.
It would actually be better if it did. That way you can be sure the blobs would be of equal thickness.
That would only work until you pierce the glass. Then all the water would drain out.
One question. How healthy is it for goldfish to live in a dark box?
Homemade Bar Clamps
Burp, I mean Bump.
That "vinegaroon" technique is used on wood also. It never occurred to me to use it on leather. But it make sense.
Elder Bluetooth Speaker
Wax drawing would work, it would just be much harder to control and next to impossible to remove after the fact. The real wizardry of masking medium is that it rubs off with your finger when the job is done.
They're not Highly toxic. That's been blown out of proportion. They have less Mercury that a straight tube light. You need to be careful cleaning them up but it doesn't take a crew from the EPA or anything like that. Just have good ventilation, move kids and pets out and don't use a vacuum cleaner. (It's glass, You wouldn't clean up glass with a vacuum cleaner anyway.)http://energyblog.nationalgeographic.com/2014/01/08/separating-myth-from-fact-on-cfls-and-leds-five-concerns-addressed/
Homemade Pellet BB Gun Flashlight/Torch
Preparing for Natural Disasters.
Essential lavaliers for filmmakers- Countryman E2 and B6
Let your inbox help you discover our best projects, classes, and contests. Instructables will help you learn how to make anything!
© 2016 Autodesk, Inc.