Tell us about yourself!
Until now, I thought there's a problem with the DHT11 library. Now i see u use an manchester library for the 433 sender. I have read to many pages...yesterday i was little confused. I will try it with the manchester ... last chance
Ok, one question: you use 4 sensors, but you con only send numbers until 65535 (uint16_t), so 4 digits used for temp and humidity. I want to send more, a number per station and a other number for alarm or something.Is there a way to send more ?
Hello ! Now this is the first time it will WORK !!! It works with manchester and dht11library from arduino.cc !Thanks for sharing your project !
I also try the addafruit library.If i use only the DHT11 it will work. If i use virtual.wire alone it will work. Both will not work. I read about this, its a problem with the interrups. But you use the same components and it will work ?!? I have testet it with Arduino 1.6.6 and an old 1.0.6. Using the pullup (10k) do nothing. Is there a problem with some pins ? I use pin 3 and 4 an tested pin 3 for DHT11 and pin 2 for 433sender...nothing works.Can not belive it. I spend many hours to this problem, i think i try small Arduino Mini Pro.
Hello. I made an similar project. I have an 433Mhz transmitter and an DHT11 on Attiny85. Transmitter works good with virtual.wire library, but i don´t get the DHT11 working ! I try 3 different librarys. One say NULL, one say -999 .If i use it on my Arduino NANO it will work.Can you write me an link to the library that u use, please ?