With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Tell us about yourself!
the common is connected to all the switches and the 3 others respectively to pins 30 31 32 , but you decide: there 're plenty of free pins on this project.
cool! yes it seem pretty little !Do you observe some noise issues with your pedals on (mostly with overdrives)?Did you use the Armando's code or mine?cheers
Hijust place // before these two lines://for (int =0;i<512;i++)//EEPROM.write(i,0);that's all
Hi Armando!I've never experienced these clicks but I know some builders have done. On the other hand, I have some noise issue when engaging my OCD on the signal path. I think this is due to the bad quality of these chinese relay board but I'm not sure... Anyway, good job coding and building! I've seen your pedals page: nice!ciao!
Yo!can you share your code with all? it's an instructable in the end...thanks!
thank you too!
Hi Armando!cool! can I include your link to this instructable?cheers
hi!in the filosophy of this project here, this is not possible. My first attempt was on the way you want today but I didn't achieve it with arduino. Though I'm pretty sure it must be a way to do it... Ask about it on arduino forums.
It depens on how many presets you want... If there are equal to the number of switch you want to add the sketch is straight forward. If you want sort of bank you'll must do add two buttons and few changes on the sketch.cheers
please, see below!
Hi!yes, noise appears to be an issue on this project. Some suggestions where told here in these comments. Like putting some resistances, decoupling with caps and using shielded cables but frankly I tried it all and it remains noisy... sorry. The only way it seems to work for me is putting a buffer before the input. Now, I cannot tell you why your sound is louder (?!!) it's a passive system...cheers
hi!yes and yes!
I see you have a house... ( I wonder it...) So why don't you install your cam on the roof?Great project though!cheers
Hi Aranius!did you solve your noise issues?
wow! welldoneman ! you're an hardware master!
You're welcome !Cheers!
Intermediate Arduino: Inputs and Outputs
Join 2 million + to receive instant DIY inspiration in your inbox.
© 2016 Autodesk, Inc.