Tell us about yourself!
Arduino Throttle Body Syncronization Shield
Hi Makuna.I can not solve this problem. Simply does not find the COM port even if I change the port to COM10 or above. Tried on different PCs and the problem is the same. Can you send me your already compiled app to try.
I've noticed that line during troubleshooting and I tried with different COM port settings, unfortunately with the same outcome. Can you suggest which lines to delete or add in the code so I can try again. I'm not so much in to writing codes. I've tried with some simple arduino codes for reading analog input and plotting to serial port just to check if my sensors work and that was successful.
Hi Makuna. I have sucessfully uploaded the SW to the Arduino, but I have problems with starting the Win app. It replies with the following popup "TBS Sensor Unit not found. Make sure the TBS unit is plugged in before starting this application"The arduino is detected as COM7. Any idea what could be the issue.Thanks.
Excellent work Makuna. I have one question regarding the Arduino model. Does your app work with the Arduino MEGA 2560 with ATmega16U2 USB-serial chip?