Tell us about yourself!
you can open a PDF file in illustrator, but if you wait a littleI will upload a new and better version soon
3D Printed Lathe
DIY PORTABLE PHOTOSTUDIO //...View Instructable »
Make Your Own High Quality CO2 Lasercutter! With Touch Control!
DSLR Brushless Gimbal
Two Part Molds
Flexible Block Molds
THERMOFORMER / VACUUM FORMER / PATTERNMAKER
Tools & Supplies
Tools and Materials for Laser Cutting
thank you ! ;)
Hi GeoForce I've chose to lasercut everything because I can adjust everything quicklythe first version was a little box of 100 x 100mm to test if our idea workedThen I increased it to 300 x 200mmDuring testing I came to the conclusion that the holes were too big and the material was sucked into the holes and then I reduce the holes and so on...
i've tried it with acrlic of 2.5mm thick but i'm sure it wil work with thicker material too
Mold Making & Casting Class
PID Temperature Controlled Oven
Easy 3D Printing
3D Printing Class
Welcome to Laser Cutting
thank you ;)
Laser Cutting Class
LEDs and Lighting Class
thanks ! the link you gave me is for how to create a mould?In my instructable you find my design for a DIY vacuum forming machine and how to make it, there is also a section on how to create a mouldI used 3D printing because the mould for the star can not be made by lasercutting because there is a relief on the surface of the star.the industrial design center logo can indeed be made by laser cuttingbut I have chosen to 3D-print the mold because it will last longer because its made out of ABS
I have exams at the moment but if you have a little patience, I would put an electric scheme online ;)
thanks ! ;)
thanks ! and nice just build one and after its ready send me some pictures ;)
dankje febe !
Cool ! Our assignment was to melt PMMA (acrylic) in a fast way so if it was for us a 250 watt lamp would be too little ;)
I think you mean where can you get a ceramic hob element?This is a link where you can buy it ;)http://www.ebay.co.uk/bhp/ceramic-hob-elementMeanwhile, I'm working on larger versions of the thermoformer (500 x 600mm and 1000 x 1200mm) in those versions, I use quartz lamps. It is as good as a ceramic hob element.The cheapest way to have these lamps is to remove the from patio heaters. If you buy the lamps separately it will cost 90 euros a piece. If you have any other questions feel free to askIf you've made it and let me know and if you would then send me some pictures of it
This content has been completed , so I can not enter it anymore
THERMOFORMER / VACUUM FORME...View Instructable »