<?xml version="1.0"?>
<rss version="2.0">
 <channel>
      <title>David97 [QUESTIONS]</title>
      <link>http://www.instructables.com</link>
      <description>Member Feed</description>
      <pubDate>Wed, 22 May 2013 06:23:39 PDT</pubDate>
      <generator>BLOX v1.01</generator>
<item>
    <title>Cheap phono preamp?</title>
    <link>http://www.instructables.com/answers/Cheap-phono-preamp/</link>
    <guid isPermaLink="false">QGRLCQ6HGH7292Y</guid>
    <author>David97</author>
    <description><![CDATA[Hi, I have a record player&nbsp;which&nbsp;I would really&nbsp;like to&nbsp;play through&nbsp;my home entertainment system. So I need a phono preamp to run it through. Does anyone have instructions on how I could make one or where I can get one really cheap?<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Cheap-phono-preamp/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Wed, 15 May 2013 01:35:28 PDT</pubDate>
</item>
<item>
    <title>Can a arduino pin mode be changed  mid program?</title>
    <link>http://www.instructables.com/answers/Can-a-arduino-pin-mode-be-changed-mid-program/</link>
    <guid isPermaLink="false">Q5T4YECHFSHUYKO</guid>
    <author>David97</author>
    <description><![CDATA[Hi, I'm working on a project that requires a reading to be taken from a pin (digital) and then that pin needs to be supplying power. Can I change the pinmode from input to output mid program, or do I need transistors to switch it between&nbsp;different&nbsp;pins instead?<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Can-a-arduino-pin-mode-be-changed-mid-program/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Tue, 7 May 2013 01:28:44 PDT</pubDate>
</item>
<item>
    <title>How to build flashing bike lights? Schematic please.</title>
    <link>http://www.instructables.com/answers/How-to-build-flashing-bike-lights-Schematic-pleas/</link>
    <guid isPermaLink="false">Q9FUAOJHFSHUYKG</guid>
    <author>David97</author>
    <description><![CDATA[Hi, I need to build some flashing led bike lights, I was thinking of flashing 6 LEDs.&nbsp;I need a really simple&nbsp;circuit&nbsp;that I can make from spare&nbsp;electronic&nbsp;junk. Anyone know where I can get a&nbsp;schematic?  Thanks, David.<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/How-to-build-flashing-bike-lights-Schematic-pleas/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Tue, 7 May 2013 01:22:38 PDT</pubDate>
</item>
<item>
    <title>Easyest way for a arduno interrupt to call a funtion?</title>
    <link>http://www.instructables.com/answers/Easyest-way-for-a-arduno-interrupt-to-call-a-funti/</link>
    <guid isPermaLink="false">QRELKITHEI4FGM4</guid>
    <author>David97</author>
    <description><![CDATA[Hi, I am trying to build a arduino speedometer for my go kart. I need a function that is called everytime a pin goes from low to high using a reed switch.  The curcumfrence of the wheel is about 1m. The absoltue maximum this kart will be able to go is about 100km/h (28m/s). So the arduino pin will n...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Easyest-way-for-a-arduno-interrupt-to-call-a-funti/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Wed, 20 Mar 2013 23:35:35 PDT</pubDate>
</item>
<item>
    <title>Can I spice hdmi cabes together to run 2 devises throught 1 monitor?</title>
    <link>http://www.instructables.com/answers/Can-I-spice-hdmi-cabes-together-to-run-2-devises-t/</link>
    <guid isPermaLink="false">QWVM1RCHEBNAYKD</guid>
    <author>David97</author>
    <description><![CDATA[Hi, I have both my xbox and raspbeerry pi runnning through the same monitor. I am sick of swapping cables everytime I want to change devise. Anyway can I connect another HDMI cabe to build a&nbsp;Y lead&nbsp;so that I can connect both devises to&nbsp;a monitor (only 1 devise will be&nbsp;powerd on at a time). Will this...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Can-I-spice-hdmi-cabes-together-to-run-2-devises-t/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Tue, 19 Mar 2013 22:57:01 PDT</pubDate>
</item>
<item>
    <title>Will jailbreaking my ipod touch allow me to get apps that need a higher iOS to run?</title>
    <link>http://www.instructables.com/answers/Willjailbreaking-my-ipod-touch-allow-me-to-get-app/</link>
    <guid isPermaLink="false">QLV3O34HAQ3BFH7</guid>
    <author>David97</author>
    <description><![CDATA[Hi, I have a second gen ipod touch. Latley I have not been able to download any new apps because it says I require a greater iOS. I am not going to buy a new ipod that I payed good money for just because apple want people to spend more money on a new devise as part of there marketing scheme. Anyway,...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Willjailbreaking-my-ipod-touch-allow-me-to-get-app/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Mon, 7 Jan 2013 21:50:23 PST</pubDate>
</item>
<item>
    <title>Will the fuze in my ATX power supply protect the power supply rails from being damaged?</title>
    <link>http://www.instructables.com/answers/Will-the-fuze-in-my-ATX-power-supply-protect-the-p/</link>
    <guid isPermaLink="false">QCQTNLOHA5M71WB</guid>
    <author>David97</author>
    <description><![CDATA[Hi, I have moded a few ATX power supplys before and my latest find has a higher wattage than my other ones. Anyway I want to make sure that I dont blow up this one. So does the fuze in the power supply on the input protect the whole power supply from over current &amp; shorts&nbsp;or do I need to fuze each r...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Will-the-fuze-in-my-ATX-power-supply-protect-the-p/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Mon, 3 Dec 2012 16:50:23 PST</pubDate>
</item>
<item>
    <title>What is a good book you would recoment for learning arduino programing?</title>
    <link>http://www.instructables.com/answers/What-is-a-good-book-you-would-recoment-for-learnin/</link>
    <guid isPermaLink="false">Q3ZRNLLH9T4QPXN</guid>
    <author>David97</author>
    <description><![CDATA[Hi, I want to buy a book that will help me understand arduino programing. I know some basic things about arduno programing. Any suggestions?  Thanks, David.<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/What-is-a-good-book-you-would-recoment-for-learnin/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Tue, 27 Nov 2012 01:12:44 PST</pubDate>
</item>
<item>
    <title>Is it legal to to use the same product key on your new computer if you old one is dead?</title>
    <link>http://www.instructables.com/answers/Is-it-legal-to-to-use-the-same-product-key-on-your/</link>
    <guid isPermaLink="false">Q3VW0SAH9T4LMYS</guid>
    <author>David97</author>
    <description><![CDATA[Hi, I have killed my old computer and have pulled the HDD and put it in a enclosure and recoverd the files I need. Anyway I want to format this drive and use it as an exturnal. So what I am asking is that if I build a new computer, can I download the iso image for the same operating system for my ol...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Is-it-legal-to-to-use-the-same-product-key-on-your/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Mon, 26 Nov 2012 22:40:36 PST</pubDate>
</item>
<item>
    <title>How to stream live video from a webcam using raspberry pi?</title>
    <link>http://www.instructables.com/answers/How-to-stream-live-video-from-a-webcam-using-raspb/</link>
    <guid isPermaLink="false">Q65SSQ0H9G15K9F</guid>
    <author>David97</author>
    <description><![CDATA[Hi, I have had my raspberry pi for about 3 months now and&nbsp;I purchased it with the intention of mounting it on an RC car&nbsp;so I can have live video. The problem is that the pi doen't support flash so I cannot simpley run my webcam through a program like skype.  I have bought a wifi usb dongle with the ...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/How-to-stream-live-video-from-a-webcam-using-raspb/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Mon, 12 Nov 2012 13:45:08 PST</pubDate>
</item>
<item>
    <title>Whats the diffrebce between BEC and UBEC?</title>
    <link>http://www.instructables.com/answers/Whats-the-diffrebce-between-BEC-and-UBEC/</link>
    <guid isPermaLink="false">QQ8MNBWH8TTPO4O</guid>
    <author>David97</author>
    <description><![CDATA[Hi, i am putting together a robotics kit with lipo batterys. I need a lipo cutoff. From my understanding both BEC and UBEC are lipo cutoffs. I&nbsp;am not sure about what the function of both of them is but from my understanding BEC is a cut off that supplys the battery voltage.  I&nbsp;think that UBEC is a l...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Whats-the-diffrebce-between-BEC-and-UBEC/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Sun, 4 Nov 2012 17:07:18 PST</pubDate>
</item>
<item>
    <title>Help choosing a genral purpose mosfets to buy in bulk?</title>
    <link>http://www.instructables.com/answers/Help-choosing-a-genral-purpose-mosfets-to-buy-in-b/</link>
    <imageThumb>/files/deriv/FVP/IAON/H8CVFUR1/FVPIAONH8CVFUR1.SQUARE2.jpg</imageThumb>
    <squareImage>/files/deriv/FVP/IAON/H8CVFUR1/FVPIAONH8CVFUR1.SQUARE.jpg</squareImage>
    <smallImage>/files/deriv/FVP/IAON/H8CVFUR1/FVPIAONH8CVFUR1.SMALL.jpg</smallImage>
    <guid isPermaLink="false">QPUM3QJH8CVFUR6</guid>
    <author>David97</author>
    <description><![CDATA[<a href="http://www.instructables.com/answers/Help-choosing-a-genral-purpose-mosfets-to-buy-in-b/"><img src="/files/deriv/FVP/IAON/H8CVFUR1/FVPIAONH8CVFUR1.SMALL.jpg" align="left" hspace="10"></a><!--dda7bd42579b4dc0937c45f979fc5c69-->Hi,&nbsp;I am looing at buying&nbsp; some mosfets in&nbsp;bulk.&nbsp;I need a mix of&nbsp;genral purpose&nbsp;N-channel annd&nbsp;P-channel mosfets. These have to be able to handle up to 40V and around 5 amp. These will be used for genral motor controlling and inductive loads. But mostley for prototyping.  I need a mosfet that is che...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Help-choosing-a-genral-purpose-mosfets-to-buy-in-b/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Tue, 23 Oct 2012 00:50:15 PDT</pubDate>
</item>
<item>
    <title>How much RAM does windows home premium 32 bit support?</title>
    <link>http://www.instructables.com/answers/How-much-RAM-does-windows-home-premium-32-bit-supp/</link>
    <guid isPermaLink="false">QHVR8RSH6730VC6</guid>
    <author>David97</author>
    <description><![CDATA[Hi, I have a toshiba satellite pro c660 with 2gb of ram installed. I want to upgrade this to 4gb. I still need to check that my CPU and motherboard will support the ram but for now I just want to know if my operating system will. I am pretty sure that I can olny install up to 4gb but I just need to ...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/How-much-RAM-does-windows-home-premium-32-bit-supp/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Tue, 4 Sep 2012 13:38:07 PDT</pubDate>
</item>
<item>
    <title>Help uploading a disk to a usb drive?</title>
    <link>http://www.instructables.com/answers/Help-uploading-a-disk-to-a-usb-drive/</link>
    <guid isPermaLink="false">QWRO4JBH5405WSC</guid>
    <author>David97</author>
    <description><![CDATA[I have bought a usb wifi adapter for my raspberry pi. The problem is&nbsp;that the drivers that come with it are on a disk. I have tryed a few ways of uploading the disk to a usb but they have all failed. I have had the usb to wifi running on my windows 7 computer (the raspberry pi is linux). I have a sp...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Help-uploading-a-disk-to-a-usb-drive/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Fri, 27 Jul 2012 03:34:50 PDT</pubDate>
</item>
<item>
    <title>Looking for a good robotic platform and motor controller?</title>
    <link>http://www.instructables.com/answers/Looking-for-a-good-robotic-platform-and-motor-cont/</link>
    <guid isPermaLink="false">Q6AQCN7H4AGJ0IO</guid>
    <author>David97</author>
    <description><![CDATA[Hi, I am looking to buy a robotic platform and a motor controller to go with it. I would also like it in a kit with a matching motor controller but it doesnt matter if it doesn't have one. I want somthing that will have good speed (about walking speed).&nbsp;I would also like it to be a bit bigger than a...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Looking-for-a-good-robotic-platform-and-motor-cont/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Wed, 11 Jul 2012 18:54:18 PDT</pubDate>
</item>
<item>
    <title>How do I work out the voltage of a speeker?</title>
    <link>http://www.instructables.com/answers/How-do-I-work-out-the-voltage-of-a-speeker/</link>
    <guid isPermaLink="false">Q3Q6FPOH2WETAV5</guid>
    <author>David97</author>
    <description><![CDATA[I want to make a ipod dock and need to now the voltage off the speekers I am using. The speekers are 4ohms at 2whatts. How do I work out the voltage I need to put through them. I think it is the forumlar is...  square root of the whatts x resistance.  Thanks for any help.<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/How-do-I-work-out-the-voltage-of-a-speeker/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Sat, 9 Jun 2012 21:34:46 PDT</pubDate>
</item>
<item>
    <title>Can I use a 9.6V Ni-MH 650mAh battery with a arduino?</title>
    <link>http://www.instructables.com/answers/an-I-use-a-96V-Ni-MH-650mAh-battery-with-a-arduin/</link>
    <guid isPermaLink="false">QE0SAXCH2MYLQJA</guid>
    <author>David97</author>
    <description><![CDATA[Hi, I have a few batterys from a plane that don't really have a use for&nbsp;anymore. I have been trying to build a rc car but AA's don't supply enough current. I was wonderig if I could use these batterys directley with a duemilanove throug the onboard voltage regulator. They are 9.6V and 650mAh. Thanks...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/an-I-use-a-96V-Ni-MH-650mAh-battery-with-a-arduin/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Sat, 26 May 2012 03:02:19 PDT</pubDate>
</item>
<item>
    <title>Can I use a 2SK2690 mosfet directley with a arduino?</title>
    <link>http://www.instructables.com/answers/Can-I-use-a-2SK2690-mosfet-directley-with-a-arduin/</link>
    <imageThumb>/files/deriv/FFX/8D4G/H2BMNONR/FFX8D4GH2BMNONR.SQUARE2.jpg</imageThumb>
    <squareImage>/files/deriv/FFX/8D4G/H2BMNONR/FFX8D4GH2BMNONR.SQUARE.jpg</squareImage>
    <smallImage>/files/deriv/FFX/8D4G/H2BMNONR/FFX8D4GH2BMNONR.SMALL.jpg</smallImage>
    <guid isPermaLink="false">QBL0VV1H2BMNONS</guid>
    <author>David97</author>
    <description><![CDATA[<a href="http://www.instructables.com/answers/Can-I-use-a-2SK2690-mosfet-directley-with-a-arduin/"><img src="/files/deriv/FFX/8D4G/H2BMNONR/FFX8D4GH2BMNONR.SMALL.jpg" align="left" hspace="10"></a><!--dda7bd42579b4dc0937c45f979fc5c69-->Hi, I want to drive a lardge DC motor with arduino and a 2sk2690 mosfet. I have teasted the transistor and it works. Can&nbsp;I connect the gate to the arduino and have it draw not much&nbsp;current. I want to do this like in the picture but allso with a resistor to drain the mosfet. All I want to know is tha...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Can-I-use-a-2SK2690-mosfet-directley-with-a-arduin/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Mon, 21 May 2012 12:24:49 PDT</pubDate>
</item>
<item>
    <title>Can I use a wired keyboard with a ipad without the adapter block?</title>
    <link>http://www.instructables.com/answers/Can-I-use-a-wired-keyboard-with-a-ipad-without-the/</link>
    <imageThumb>/files/deriv/F3V/RIYA/H1ZG7UBV/F3VRIYAH1ZG7UBV.SQUARE2.jpg</imageThumb>
    <squareImage>/files/deriv/F3V/RIYA/H1ZG7UBV/F3VRIYAH1ZG7UBV.SQUARE.jpg</squareImage>
    <smallImage>/files/deriv/F3V/RIYA/H1ZG7UBV/F3VRIYAH1ZG7UBV.SMALL.jpg</smallImage>
    <guid isPermaLink="false">QQCUHG2H1ZG7UBX</guid>
    <author>David97</author>
    <description><![CDATA[<a href="http://www.instructables.com/answers/Can-I-use-a-wired-keyboard-with-a-ipad-without-the/"><img src="/files/deriv/F3V/RIYA/H1ZG7UBV/F3VRIYAH1ZG7UBV.SMALL.jpg" align="left" hspace="10"></a><!--dda7bd42579b4dc0937c45f979fc5c69-->I have seen videos on youtube of people using a ipad with a wired keyboard but they all use a adapter block. Could&nbsp;I use a female to female connector instead of the adapter block and the&nbsp;orignal usb cable&nbsp;would it stiill work. If anyone has a&nbsp;Ipad and a female to female connector can you try it&nbsp;for ...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Can-I-use-a-wired-keyboard-with-a-ipad-without-the/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Sat, 19 May 2012 21:03:35 PDT</pubDate>
</item>
<item>
    <title>Can I drive a stepper motor with a dual H-bridge?</title>
    <link>http://www.instructables.com/answers/Can-I-drive-a-stepper-motor-with-a-dual-H-bridge/</link>
    <guid isPermaLink="false">QWAAZRJH0A2HE9K</guid>
    <author>David97</author>
    <description><![CDATA[I was looking at building a small desktop&nbsp;CNC after looking around i found this. Anyway instead of buying a expensive motor controller could&nbsp;I buy a dual H-bridge per stepper?  Also if anyone knows a cheeper alternative cnc controller could you please tell me about it in the comments.<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Can-I-drive-a-stepper-motor-with-a-dual-H-bridge/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Wed, 28 Mar 2012 23:15:45 PDT</pubDate>
</item>
<item>
    <title>Can i run my arduino off 4xaa batterys?</title>
    <link>http://www.instructables.com/answers/Can-i-run-my-arduino-off-4xaa-batterys/</link>
    <guid isPermaLink="false">QAMAE8GGZUASIJA</guid>
    <author>David97</author>
    <description><![CDATA[I would like to run my arduino (deumonilative)&nbsp;off 4 aa batterys to the power jack. Would this damage my arduino. Thanks, David.<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Can-i-run-my-arduino-off-4xaa-batterys/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Mon, 26 Mar 2012 01:00:00 PDT</pubDate>
</item>
<item>
    <title>Has anyone seen this motor and know how to run it?</title>
    <link>http://www.instructables.com/answers/Has-anyone-seen-this-motor-and-know-how-to-run-it/</link>
    <imageThumb>/files/deriv/F8R/EYZM/GZ6T0JD2/F8REYZMGZ6T0JD2.SQUARE2.jpg</imageThumb>
    <squareImage>/files/deriv/F8R/EYZM/GZ6T0JD2/F8REYZMGZ6T0JD2.SQUARE.jpg</squareImage>
    <smallImage>/files/deriv/F8R/EYZM/GZ6T0JD2/F8REYZMGZ6T0JD2.SMALL.jpg</smallImage>
    <guid isPermaLink="false">Q0XW8UJGZ6T0JMX</guid>
    <author>David97</author>
    <description><![CDATA[<a href="http://www.instructables.com/answers/Has-anyone-seen-this-motor-and-know-how-to-run-it/"><img src="/files/deriv/F8R/EYZM/GZ6T0JD2/F8REYZMGZ6T0JD2.SMALL.jpg" align="left" hspace="10"></a><!--dda7bd42579b4dc0937c45f979fc5c69-->Hi, I got A Rckit from my dads freind and was going to use it to drive a rc car. I set it up and it worked for awhile but I think it was the wrong ESC/Receiver and It went POOF when I was running it normally. A few months later I orderd a proper RC system To go with my arduino and after driving a fe...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Has-anyone-seen-this-motor-and-know-how-to-run-it/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Tue, 28 Feb 2012 20:18:05 PST</pubDate>
</item>
<item>
    <title>Question about using a L298N motor driver with arduino ?</title>
    <link>http://www.instructables.com/answers/Question-about-using-a-L298N-motor-driver-with-ard/</link>
    <guid isPermaLink="false">QLCQIY5GYQESOKH</guid>
    <author>David97</author>
    <description><![CDATA[I was looking at making a small rc tank with the lawnbots code. i have tryed small home built motorcontrollers and had seccus but thought It may be tine to build somthing better. I was looking at the L298N motor driver b ut dont have any idea what the EN_1 and EN_2 connections are for. Can someone p...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Question-about-using-a-L298N-motor-driver-with-ard/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Fri, 2 Mar 2012 01:00:00 PST</pubDate>
</item>
<item>
    <title>Shipping from hobbypartz.com?</title>
    <link>http://www.instructables.com/answers/Shipping-from-hobbypartzcom/</link>
    <guid isPermaLink="false">QD4OYEDGXL5XY44</guid>
    <author>David97</author>
    <description><![CDATA[I was going to order this rc set but cannot work out shipping to New Zealand, Christchurch. Can anyone help me? What is the shipping costs? <br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Shipping-from-hobbypartzcom/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Sat, 21 Jan 2012 23:27:46 PST</pubDate>
</item>
<item>
    <title>What would bee a goodd rc 2.4ghz system to use with arduino?</title>
    <link>http://www.instructables.com/answers/What-would-bee-a-goodd-rc-24ghz-system-to-use-wit/</link>
    <guid isPermaLink="false">Q9OXC3IGXMS5Y7W</guid>
    <author>David97</author>
    <description><![CDATA[I am looking to buy a 2.4ghz 6channel rc system to go with my arduino.&nbsp; I need one that I can program what the channels do and I need to be able to program what state the rc reciver reverts back to after loosing signal.&nbsp;I am on a limited budget ($100-NZD $80-USD) and need it to be able to control al...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/What-would-bee-a-goodd-rc-24ghz-system-to-use-wit/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Fri, 20 Jan 2012 15:40:45 PST</pubDate>
</item>
<item>
    <title>Helicopter parts for 4 channel pandora helicopter?</title>
    <link>http://www.instructables.com/answers/Helicopter-parts-for-4-channel-pandora-helicopter/</link>
    <guid isPermaLink="false">Q9O7YE4GWKKMQLX</guid>
    <author>David97</author>
    <description><![CDATA[For christmas I got a 4 channel GT-3386 helicopter. After battling it with my brothers hellicopter snapped the&nbsp; guards off the side fan and now it is&nbsp; unstabe. I could not find a spare part but after watching a review on my helicopter he called it a Z008 instead of GT-3386. So I searched online that...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Helicopter-parts-for-4-channel-pandora-helicopter/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Wed, 28 Dec 2011 15:38:12 PST</pubDate>
</item>
<item>
    <title>Where can I gat cheap materails for setting up a etching station in New Zealand?</title>
    <link>http://www.instructables.com/answers/Where-can-I-gat-cheap-materails-for-setting-up-a-e/</link>
    <guid isPermaLink="false">QS9X9I7GWLXELPF</guid>
    <author>David97</author>
    <description><![CDATA[I have wanted to etch my own PCBs but didn't have the money. Now I have got a little bit of money and wonderd where the cheapest place was to get etching materails in New Zealand (preferabially in christchurch). Can anyone help?<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Where-can-I-gat-cheap-materails-for-setting-up-a-e/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Mon, 26 Dec 2011 00:02:22 PST</pubDate>
</item>
<item>
    <title>Arduino battery 9.6V 650mAh. Help?</title>
    <link>http://www.instructables.com/answers/Arduino-battery-96V-650mAh-Help/</link>
    <guid isPermaLink="false">QPHMZA9GWF6EN1X</guid>
    <author>David97</author>
    <description><![CDATA[I have alot of rc plane Ni-MH recharagables that&nbsp;I dont have a use for since my reciver blew up. Can&nbsp;I run my arduino deumonlative on these batterys they are 9.6V and 650mAh.  Also I wold like to know how many mA can&nbsp;I draw from the arduinos 5V supply.  Thanks for any help, David.<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Arduino-battery-96V-650mAh-Help/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Fri, 23 Dec 2011 18:18:11 PST</pubDate>
</item>
<item>
    <title>Arduino yellow drummer robot?</title>
    <link>http://www.instructables.com/answers/Arduino-yellow-drummer-robot/</link>
    <imageThumb>/files/deriv/F1S/PXWW/GVVP88PS/F1SPXWWGVVP88PS.SQUARE2.jpg</imageThumb>
    <squareImage>/files/deriv/F1S/PXWW/GVVP88PS/F1SPXWWGVVP88PS.SQUARE.jpg</squareImage>
    <smallImage>/files/deriv/F1S/PXWW/GVVP88PS/F1SPXWWGVVP88PS.SMALL.jpg</smallImage>
    <guid isPermaLink="false">QMJM8EAGVVP88PX</guid>
    <author>David97</author>
    <description><![CDATA[<a href="http://www.instructables.com/answers/Arduino-yellow-drummer-robot/"><img src="/files/deriv/F1S/PXWW/GVVP88PS/F1SPXWWGVVP88PS.SMALL.jpg" align="left" hspace="10"></a><!--dda7bd42579b4dc0937c45f979fc5c69-->  I was looking at building a yellow drummer robot that I saw in Make 25.&nbsp;I don't have a Picaxe,&nbsp;the problem is that I have seen pictuures and videos of people that have used arduino but no detailed instructions. Can anyone give me a link to instructions or&nbsp; give me tips. The best help I have had so...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Arduino-yellow-drummer-robot/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Wed, 7 Dec 2011 00:46:46 PST</pubDate>
</item>
<item>
    <title>Need help finding a datasheet for a camera?</title>
    <link>http://www.instructables.com/answers/Need-help-finding-a-datasheet-for-a-camera/</link>
    <guid isPermaLink="false">QP5HNZQGVO9CGTK</guid>
    <author>David97</author>
    <description><![CDATA[I scavenged a camera from a cellphone and thought it might be usefull for somthing with a arduino. The problem is that I can't find any datasheets on this part. The part number is... A6J925 3471933&nbsp;&nbsp;&nbsp;&nbsp; 3 If any one has this camera, a datasheet, or knows anything about this part any help would be hel...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Need-help-finding-a-datasheet-for-a-camera/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Thu, 1 Dec 2011 23:38:32 PST</pubDate>
</item>
<item>
    <title>What is the supply (MAh) of a 9 volt battery? The draw of an arduino in genral use? And a standerd led?</title>
    <link>http://www.instructables.com/answers/What-is-the-supply-MAh-of-a-9-volt-battery-The-/</link>
    <guid isPermaLink="false">Q5K30PJGVBD00KV</guid>
    <author>David97</author>
    <description><![CDATA[I was building a fancy arduino supply and need to know the draw from these three things. Can anyone tell me. What a arduino duemilanove draws (in standerd use)&nbsp;(MAh)? What a 9 volt battery supplys (MAh)? What a adverage led uses (Mah)<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/What-is-the-supply-MAh-of-a-9-volt-battery-The-/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Fri, 25 Nov 2011 17:19:04 PST</pubDate>
</item>
<item>
    <title>Help with chardging batterys in paralell?</title>
    <link>http://www.instructables.com/answers/Help-with-chardging-batterys-in-paralell/</link>
    <imageThumb>/files/deriv/FZQ/MSZQ/GUMF7W6L/FZQMSZQGUMF7W6L.SQUARE2.jpg</imageThumb>
    <squareImage>/files/deriv/FZQ/MSZQ/GUMF7W6L/FZQMSZQGUMF7W6L.SQUARE.jpg</squareImage>
    <smallImage>/files/deriv/FZQ/MSZQ/GUMF7W6L/FZQMSZQGUMF7W6L.SMALL.jpg</smallImage>
    <guid isPermaLink="false">QFY00ROGUMF7W6G</guid>
    <author>David97</author>
    <description><![CDATA[<a href="http://www.instructables.com/answers/Help-with-chardging-batterys-in-paralell/"><img src="/files/deriv/FZQ/MSZQ/GUMF7W6L/FZQMSZQGUMF7W6L.SMALL.jpg" align="left" hspace="10"></a><!--dda7bd42579b4dc0937c45f979fc5c69-->I have a Nikko Super Dictator witch I replaced all the eletronics in it apart of the engines.&nbsp;I used an rc reciver I found lying around out of a plane. I put this in the car (it olny has one engine now because&nbsp;one was blowen with the eletronics when I got it). The problem is that the batterys get ho...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Help-with-chardging-batterys-in-paralell/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Sun, 6 Nov 2011 01:04:42 PST</pubDate>
</item>
<item>
    <title>Rc car modding help?</title>
    <link>http://www.instructables.com/answers/Rc-car-modding-help/</link>
    <imageThumb>/files/deriv/FG9/JE4K/GT5JYOHP/FG9JE4KGT5JYOHP.SQUARE2.jpg</imageThumb>
    <squareImage>/files/deriv/FG9/JE4K/GT5JYOHP/FG9JE4KGT5JYOHP.SQUARE.jpg</squareImage>
    <smallImage>/files/deriv/FG9/JE4K/GT5JYOHP/FG9JE4KGT5JYOHP.SMALL.jpg</smallImage>
    <guid isPermaLink="false">QZM79PEGT5JYOHQ</guid>
    <author>David97</author>
    <description><![CDATA[<a href="http://www.instructables.com/answers/Rc-car-modding-help/"><img src="/files/deriv/FG9/JE4K/GT5JYOHP/FG9JE4KGT5JYOHP.SMALL.jpg" align="left" hspace="10"></a><!--dda7bd42579b4dc0937c45f979fc5c69-->My dad had (broken)&nbsp;a rc car from a old friend that was sitting in the garage. He said that I could have it. It is a Nikko Super Dictator. When we were trying to fix it the curcuit board went poof and clouds of smoke came out of it, I don't want to fix the board but was thinking about buying a cheap...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Rc-car-modding-help/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Fri, 30 Sep 2011 15:12:11 PDT</pubDate>
</item>
<item>
    <title>Reseting arduino?</title>
    <link>http://www.instructables.com/answers/Reseting-arduino/</link>
    <guid isPermaLink="false">QXM63LPGT19NLG8</guid>
    <author>David97</author>
    <description><![CDATA[I bought an arduino (duemilanove) and uploaded the blink example (flashing light). Now when I plug it in it flashes. How do I reset it or does the old programing&nbsp; delete its self when I put somthing else on.<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Reseting-arduino/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Tue, 27 Sep 2011 02:09:35 PDT</pubDate>
</item>
<item>
    <title>Audio signal help?</title>
    <link>http://www.instructables.com/answers/Audio-signal-help/</link>
    <guid isPermaLink="false">Q0E8A1MGSOEN0WZ</guid>
    <author>David97</author>
    <description><![CDATA[I was going to build Amplifier with Gain = 20 Minimum Parts From this datasheet&nbsp;But I have no Idea how to put the signal on. I think that the signal is Vin (pin 3)&nbsp; but that is one cable when a headphone has three cables. I know the red wire is right and the blue is left and the other is comm so&nbsp;I o...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Audio-signal-help/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Sun, 18 Sep 2011 19:03:01 PDT</pubDate>
</item>
<item>
    <title>Adding capacitors. Series or parallel?</title>
    <link>http://www.instructables.com/answers/Adding-capacitors-Series-or-parallel/</link>
    <guid isPermaLink="false">Q21BYFJGSOEMP8D</guid>
    <author>David97</author>
    <description><![CDATA[I&nbsp;was building a curcuit and had no 0.05uf capasitators so I decided to use&nbsp;five 0.01&nbsp;capastators. Should I wire them in series or parallel? Also they are ceramic. Thanks for any help. David.<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Adding-capacitors-Series-or-parallel/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Sat, 17 Sep 2011 21:25:37 PDT</pubDate>
</item>
<item>
    <title>USB battery chardger?</title>
    <link>http://www.instructables.com/answers/USB-battery-chardger/</link>
    <guid isPermaLink="false">QQ3B0XUGS3BE2Z7</guid>
    <author>David97</author>
    <description><![CDATA[I was going to build a amplfyer and because it was mainley going to be pluged into a computer I thought that it would be a good idea to have it chardge off usb.&nbsp;I want to chardge two aaa batterys by usb. Are there any instructables showing how to&nbsp;make a dual&nbsp;aaa usb&nbsp;chardger?<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/USB-battery-chardger/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Tue, 6 Sep 2011 22:25:24 PDT</pubDate>
</item>
<item>
    <title>How many whatts is this person using?</title>
    <link>http://www.instructables.com/answers/How-many-whatts-is-this-person-using/</link>
    <guid isPermaLink="false">QX7XPFXGS3BDY4C</guid>
    <author>David97</author>
    <description><![CDATA[I want to build this amplfyer but have no idea what wattage speeker they are using. Can any one tell me (I already know it is 8ohms)?<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/How-many-whatts-is-this-person-using/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Tue, 6 Sep 2011 00:57:01 PDT</pubDate>
</item>
<item>
    <title>C327 instead of BC327 transistor help?</title>
    <link>http://www.instructables.com/answers/C327-instead-of-BC327-transistor-help/</link>
    <guid isPermaLink="false">Q7UWGPBGS3BDNST</guid>
    <author>David97</author>
    <description><![CDATA[I&nbsp;went to buy some transistors and the person in the shop handed me C327 insted of BC327. Would C327 work instead of BC327 in a amplfyer circuit.<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/C327-instead-of-BC327-transistor-help/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Sat, 3 Sep 2011 03:47:01 PDT</pubDate>
</item>
<item>
    <title>Is there another way to make pcbs without copper board, lazer printers, or acid?</title>
    <link>http://www.instructables.com/answers/Is-there-another-way-to-make-pcbs-without-copper-b/</link>
    <guid isPermaLink="false">Q4GXP2IGS3BD0IN</guid>
    <author>David97</author>
    <description><![CDATA[I need to bulid a PCB but dont have time to buy&nbsp;equipment also it is going to be a one off build so&nbsp;I also&nbsp;dont want to buy anything expensave. I have strip board but getting what&nbsp;I want to make small is very hard. Is there a way to build pcbs with household items?<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Is-there-another-way-to-make-pcbs-without-copper-b/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Fri, 2 Sep 2011 14:31:52 PDT</pubDate>
</item>
<item>
    <title>Battery conversion?</title>
    <link>http://www.instructables.com/answers/Battery-conversion/</link>
    <guid isPermaLink="false">Q6SNQAWGRFN29VT</guid>
    <author>David97</author>
    <description><![CDATA[I have a rc helicopter and the controler uses 6X aa batterys. I thought that it would be cheaper to use a 9 volt battery instead. Would it damage my remote?&nbsp;Also&nbsp;Would this affect battery life and if so&nbsp;by how much?<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Battery-conversion/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Mon, 22 Aug 2011 00:16:55 PDT</pubDate>
</item>
<item>
    <title>Finding out the value on a rc crystal?</title>
    <link>http://www.instructables.com/answers/Finding-out-the-value-on-a-rc-crystal/</link>
    <guid isPermaLink="false">Q9C23FWGRFMV9CJ</guid>
    <author>David97</author>
    <description><![CDATA[I&nbsp;have a rc kit and need to know what the reciver frequency is (so I can get a Transmitter). The crystal has nothing saying the frequency. The part number on the crystal is... 26 800 6BF-15  any help would be apprecated. Thanks.  PS: While writing this My brother was playing with another Rc kit and ...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Finding-out-the-value-on-a-rc-crystal/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Mon, 22 Aug 2011 14:21:19 PDT</pubDate>
</item>
<item>
    <title>Remote control reciver help?</title>
    <link>http://www.instructables.com/answers/Remote-control-reciver-help/</link>
    <imageThumb>/files/deriv/FCU/Y7VI/GQYG6KP8/FCUY7VIGQYG6KP8.SQUARE2.jpg</imageThumb>
    <squareImage>/files/deriv/FCU/Y7VI/GQYG6KP8/FCUY7VIGQYG6KP8.SQUARE.jpg</squareImage>
    <smallImage>/files/deriv/FCU/Y7VI/GQYG6KP8/FCUY7VIGQYG6KP8.SMALL.jpg</smallImage>
    <guid isPermaLink="false">QRHQ45EGQYG6KPE</guid>
    <author>David97</author>
    <description><![CDATA[<a href="http://www.instructables.com/answers/Remote-control-reciver-help/"><img src="/files/deriv/FCU/Y7VI/GQYG6KP8/FCUY7VIGQYG6KP8.SMALL.jpg" align="left" hspace="10"></a><!--dda7bd42579b4dc0937c45f979fc5c69-->  I need to replace a part from a remote control areoplane. The part number is 06N03LZ and&nbsp;I cant find anywhere where&nbsp;I can buy one.&nbsp;Does anyone know a online store with the part listed and can they give me a link? Thanks. (it looks like the same one in picture but I cant tell because it is in anoth...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Remote-control-reciver-help/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Tue, 9 Aug 2011 21:09:21 PDT</pubDate>
</item>
<item>
    <title>I&apos;ve built a skateboard at school and have a problem with the kick wearing out?</title>
    <link>http://www.instructables.com/answers/Ive-built-a-skateboard-at-school-and-have-a-probl/</link>
    <guid isPermaLink="false">QPZQVEAGQO92MMA</guid>
    <author>David97</author>
    <description><![CDATA[I built a skateboard at school and the first time&nbsp;I rode the varnish wore off the kick. I want to make a kick protector out of somthing like nylon. How&nbsp;could I attach it so I can detash it again. also any Sugestions on how else I could do it? (if i cant do it without glue or bolts please still offer...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Ive-built-a-skateboard-at-school-and-have-a-probl/">Continue Reading &raquo;</a>]]></description>
    <category>outside</category>
    <pubDate>Fri, 29 Jul 2011 02:46:23 PDT</pubDate>
</item>
<item>
    <title>Could I use BC547 instead of BC548?</title>
    <link>http://www.instructables.com/answers/Could-I-use-BC547-instead-of-BC548/</link>
    <guid isPermaLink="false">QBSA1YZGQKLPJ1N</guid>
    <author>David97</author>
    <description><![CDATA[When building this instructable&nbsp;I relised I had no BC548 transistors. Could I use BC547 insted. Here is a link to both datasheets.  BC548  BC547 <br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Could-I-use-BC547-instead-of-BC548/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Wed, 27 Jul 2011 21:33:19 PDT</pubDate>
</item>
<item>
    <title>help making a amplfyer?</title>
    <link>http://www.instructables.com/answers/help-making-a-amplfyer/</link>
    <guid isPermaLink="false">QTMN7EVGQ5QCX14</guid>
    <author>David97</author>
    <description><![CDATA[I was going to build a amplfyer from this instructable but had no BC548 or 2N3904 transistors. I did a google search to find out what could also work. I found a website&nbsp;stating simmalar transistors. On this website, at the related transistors section it states a few simmalar transistors. What transi...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/help-making-a-amplfyer/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Mon, 25 Jul 2011 21:46:18 PDT</pubDate>
</item>
<item>
    <title>How to make rocket fuel from easly found ingredients?</title>
    <link>http://www.instructables.com/answers/How-to-make-rocket-fuel-from-easly-found-ingredien/</link>
    <guid isPermaLink="false">QY9SOM2GQ5QCLKM</guid>
    <author>David97</author>
    <description><![CDATA[I have been looking to make rocket fuel to power a rocket but many use potasium nitrate as a oxider. Can anyone tell me a good oxidiser found in household item(s) that&nbsp;I can use instead of KNO3? (It will work with sugar) Thanks - David.<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/How-to-make-rocket-fuel-from-easly-found-ingredien/">Continue Reading &raquo;</a>]]></description>
    <category>play</category>
    <pubDate>Sun, 24 Jul 2011 20:20:59 PDT</pubDate>
</item>
<item>
    <title>Remote control transmitter and reciver?</title>
    <link>http://www.instructables.com/answers/Remote-control-transmitter-and-reciver/</link>
    <guid isPermaLink="false">Q4H7YJOGOW3YDMS</guid>
    <author>David97</author>
    <description><![CDATA[I saw a instructable on how to get free eletronics&nbsp;and need the number&nbsp;of a 4 channel variable speed transimtter and reciver (for example 555 is a timer) preferabley 27 MHZ. If you know the part number please post it in comments. Thanks David.<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Remote-control-transmitter-and-reciver/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Tue, 14 Jun 2011 18:55:33 PDT</pubDate>
</item>
<item>
    <title>Building a genertor?</title>
    <link>http://www.instructables.com/answers/Building-a-genertor/</link>
    <imageThumb>/files/deriv/FUP/YXS9/GO6V9U4S/FUPYXS9GO6V9U4S.SQUARE2.jpg</imageThumb>
    <squareImage>/files/deriv/FUP/YXS9/GO6V9U4S/FUPYXS9GO6V9U4S.SQUARE.jpg</squareImage>
    <smallImage>/files/deriv/FUP/YXS9/GO6V9U4S/FUPYXS9GO6V9U4S.SMALL.jpg</smallImage>
    <guid isPermaLink="false">Q061B2DGO6V9OZJ</guid>
    <author>David97</author>
    <description><![CDATA[<a href="http://www.instructables.com/answers/Building-a-genertor/"><img src="/files/deriv/FUP/YXS9/GO6V9U4S/FUPYXS9GO6V9U4S.SMALL.jpg" align="left" hspace="10"></a><!--dda7bd42579b4dc0937c45f979fc5c69--> I have a 5sme22nj028a general electric motor and wanted to buld a generator. It is 10 pin (not including earth). I have used a voltmeter to see what generate but there are many combonations and they all seem to generate. Also it is brushless. I have posted this question before but fogort to include...<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/Building-a-genertor/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Mon, 6 Jun 2011 01:00:00 PDT</pubDate>
</item>
<item>
    <title>My computer is running at 60% CPU sitting on idle. Help!!!</title>
    <link>http://www.instructables.com/answers/My-computer-is-running-at-60-CPU-sitting-on-idle/</link>
    <guid isPermaLink="false">QHF7UYEGNNURPH4</guid>
    <author>David97</author>
    <description><![CDATA[My windows vista laptop is running at about 60% cpu on idle. If I move the mouse fast it goes up realy high&nbsp;80%.&nbsp;When I go on internet it fulls up and frezes.&nbsp;How do I tell what programs are running to block it up. And how do I clear it out?<br/>By: <a href="http://www.instructables.com/member/David97/">David97</a><br><br><a href="http://www.instructables.com/answers/My-computer-is-running-at-60-CPU-sitting-on-idle/">Continue Reading &raquo;</a>]]></description>
    <category>technology</category>
    <pubDate>Fri, 13 May 2011 23:19:00 PDT</pubDate>
</item>
 </channel>
</rss>

