With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Tell us about yourself!
Making a mask out of Fiberglass-Resin.
As long as it's not too badly damaged. Can't hurt to try, worst case scenario is you have to restart the thing.
I just finished pulling out the clay off the plaster. Apparently there are some problems such as my plaster is not thick enough so it cracked a bit and took me ages to get the clay and the foam out. I repaired the holes and broken bits with the clay and let it dry. You reckon this will still works when I pour in the fiberglass resin?
I don't think I've ever used body filler so not entirely sure? You could try half 'n half and see if that works.
I just finished the mouldings process for the clay. I'll put some plaster on later. This is the best I can do for Jiro's mask. Just wondering, what's the proportion of resin and body filler should I put in one cup?
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.