2CommentsJoined November 2nd, 2015

Tell us about yourself!

Complete Your Profile
  • EL34xyz commented on taleya's forum topic Cutting PVC Pipe - Lengthwise for guttering10 months ago

    Tip for ripping pvc pipe on a table saw. Use a 2x4 as your guide. Lay the 2x4 next to the pipe. Make sure the pipe and 2x4 are both resting on a flat surface. Drill a hole at end end of the pipe and then angle a screw through the inside of the pipe into the 2x4 to anchor the pipe to the 2x4. Now you have a flat surface that you can use on the table saw surface.And 2x4's are cheaper than buying another piece of pipe if it's a large diameter pipe.

    View Topic »