loading
1 Comments

Tell us about yourself!

Complete Your Profile
  • Bypass Your Broken Airport Express PSU with an USB Power Source

    Just to note I tried this and it didn't work with the CF reader I had.I had the 'N' version of the Airport Express which was fully working, and checking the power it only required +3.3v. I found the +3.3v on the CF reader (either the card detect pin, of off of on side of an LED, which stayed at 3.3v until I plugged into the airport express.Once plugged in it dropped drown to 0.5v, so I'm guessing that the CF reader can't cope with the power that the airport express if drawing :-(.Tried with the a 1amp USB and off the laptop

    View Instructable »