Handsome-Ryan
- Date Joined:Oct 4, 2007
- Instructables:4
- Total Views:106,118
- Featured %:50%
- Subscribers:6
- Topics:5
- Comments:112
Instructables 
Patches
Handsome-Ryan has not received any patches yet... send Handsome-Ryan a patch!
Forum Topics
last post by guyfrom7up
4 years ago
0
replies
Cheap sources of stuff to build/modify.
posted 4 years ago
in Life
Comments 1-10 of 105(view all)
» Absolutely. I hadn't thought of a vibration sensor but it would certainly work for that…
» Insert the wire into the hole and solder to hold it in place. I hope this helps.
» You could use a standard magnet but they don't have as much "pull" so you might need a …
» If you figure out a different/better mounting method get some pics and I'll gladly post…
» Are you not concerned with algae growing in the clear tubing?
» Good luck with the build. I've been using this rack for a while now and I still really …
» This is why I come to this website; information like this. Thanks for sharing.
» Awesome. 5/5.
» Sure. • The 2x4 shelves that hold the upper bikes are 5 feet long. • The A-frames have…
» Nice instructable. Since you are not running pressurized fluid through the pipes, th…
» Insert the wire into the hole and solder to hold it in place. I hope this helps.
» You could use a standard magnet but they don't have as much "pull" so you might need a …
» If you figure out a different/better mounting method get some pics and I'll gladly post…
» Are you not concerned with algae growing in the clear tubing?
» Good luck with the build. I've been using this rack for a while now and I still really …
» This is why I come to this website; information like this. Thanks for sharing.
» Awesome. 5/5.
» Sure. • The 2x4 shelves that hold the upper bikes are 5 feet long. • The A-frames have…
» Nice instructable. Since you are not running pressurized fluid through the pipes, th…
