With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
bhai gazab ka project hai...hats off
Just apply flux before soldering.Thanks
Bro, 40 watt tubelight is easily replaced by 18 to 24 watt led tube,for same amount of light output(1800 lumen) a 22 watt led tube is sufficient. Use 4 feet,3mm in thickness aluminium strip and place the led and heatsink with the help of adhesive. In driver, you can use inductor from damaged cfl circuit.Please refer to the diagram. Thanks
Gduino-No Programmer Required!! For 5$,Programs Multiple AVRs
Make a giant LED sign! (24x8 Matrix)
24*10 LED MATRIX PERFECTLY RUNNING
ARDUINO AS A 8051 PROGRAMMER - CHEAPEST PROGRAMMER IN THE WORLD
Color Changing Festive Lamp
High Power LED Driver Circuits
5 Watt LED Bulb
LED Scolling Dot Matrix Font & Graphics Generator 5x8 5x7 8x8
Make a 24X6 LED matrix
LED matrix using shift registers
Controlling An LED Matrix
Custom Lasercut Sign
PS/2/You: Go-anywhere, LED digital message board
DIY PCB lab for under $35.00
Make Your Own Desktop LED Lamp
Join 2 million + to receive instant DIY inspiration in your inbox.
© 2016 Autodesk, Inc.