Jayefuu
One Contest Entry
Instructables 
Achievements
Patches
from
number8wire
from
jessyratfink
from
iceng
from
rimar2000
from
Creativeman
from
bongodrummer
from
Lithium Rain
from
bertus52x11
from
laxap
from
mikeasaurus
from
Lynne Bruning
from
Kiteman
Questions
 | Wordpress Woes - "Sorry you are looking for something that isn't there"? Asked in Technology 1 year ago  |
 |
 |
 |
 |
Best Answers
» This will give you all featured Instructables:http://www.instructables.com/tag/type-id/featured-t…
» The displayed number of views lags behind the acutual number of views. I'd imagine that the views…
» This picture even shows the purple switch:
» Farnell, RS Electronics, Rapid Electronics, Digikey and eBay all sell them. They might also be li…
» *ahem*http://www.instructables.com/community/Total-Views-Count-05012012/Thanks for reminding me, …
» YIf I understand what you're trying to do, you should be using the arduino to capture sensor data…
» Go to www.instructables.com/you/Then click "Pro Membership"Copy the pro code.Ask your friend/teac…
» Tshirt, 2 stickers and a fabric patch.
» The Archos 7 is pretty swish. You can get models with a 160GB hdd instead of 8gb flash.
» Ha! There are some of these at my work, a guy that used to work for us used them as new file hand…
» The displayed number of views lags behind the acutual number of views. I'd imagine that the views…
» This picture even shows the purple switch:
» Farnell, RS Electronics, Rapid Electronics, Digikey and eBay all sell them. They might also be li…
» *ahem*http://www.instructables.com/community/Total-Views-Count-05012012/Thanks for reminding me, …
» YIf I understand what you're trying to do, you should be using the arduino to capture sensor data…
» Go to www.instructables.com/you/Then click "Pro Membership"Copy the pro code.Ask your friend/teac…
» Tshirt, 2 stickers and a fabric patch.
» The Archos 7 is pretty swish. You can get models with a 160GB hdd instead of 8gb flash.
» Ha! There are some of these at my work, a guy that used to work for us used them as new file hand…
Forum Topics
last post by Goodhart
2 days ago
14
replies
What would you make with a desktop CNC milling machine
posted 6 days ago
in Burning Questions
last post by Goodhart
2 days ago
0
replies
Total Views Count - 19/01/2012
posted 21 days ago
in Community Blog
last post by Sorunome
2 days ago
6
replies
Total Views Count - 12/01/2012
posted 27 days ago
in Total Views Count
last post by PotatoCoffee
26 days ago
10
replies
Total Views Count - 05/01/2012
posted 1 month ago
in Total Views Count
last post by monsterlego
1 month ago
22
replies
Total Views Count - 03/11/11
posted 3 months ago
in Total Views Count
Comments 1-10 of 956(view all)
» Thanks :)
» That's a fact, of course taking a chip out of a cradle will be faster than unsoldering …
» Sounds like you just need more practice :) I go for the solder paste and heat gun metho…
» I love this stuff!
» HA. I love futurama but hadn't seen htis episode before. You have to make it!
» Yes, they wouldn't look anywhere near as pretty in my shoe rack, which is just as well …
» Hey they look great! When you said shoe rack I thought you meant something like this. W…
» Brilliant video :) Very inspiring.
» Ha ha that's fantastic. That servo gives the perfect motion for it :D
» It's very clever, but needs a way for it to load them automatically surely.... At the m…
» That's a fact, of course taking a chip out of a cradle will be faster than unsoldering …
» Sounds like you just need more practice :) I go for the solder paste and heat gun metho…
» I love this stuff!
» HA. I love futurama but hadn't seen htis episode before. You have to make it!
» Yes, they wouldn't look anywhere near as pretty in my shoe rack, which is just as well …
» Hey they look great! When you said shoe rack I thought you meant something like this. W…
» Brilliant video :) Very inspiring.
» Ha ha that's fantastic. That servo gives the perfect motion for it :D
» It's very clever, but needs a way for it to load them automatically surely.... At the m…
Favorites
Groups
Orangeboard
87
comments
|
Add Comment
|
Thanks for the reply on Total Views... had to check out your page.
Ninjabread men? - Hilarious. :D
Ninjabread men? - Hilarious. :D
Thanks, sadly not an original idea of mine, I saw it online and wanted some so made my own.
Thanks for subbing and are you still giving out the count patches? Because I haven't received any yet...
Done! And now they're given out automatically each time I run the script.
Get an easter egg mould from Amazon.com and make a K'nex rotational moulder to spin the mould and fling chocolate to the outside of the mould.
Here's a link to a youtube video that should give you some inspiration:
http://www.youtube.com/watch?v=KkNkQRC0czc
I'm currently making a big steel version to make a large silicone vacuum bag for something.
Here's a link to a youtube video that should give you some inspiration:
http://www.youtube.com/watch?v=KkNkQRC0czc
I'm currently making a big steel version to make a large silicone vacuum bag for something.
This group that you've set up is fabulous! It's a great way to watch where you're going, view-wise.
Win Guy
Win Guy
Thanks. I was out of the country last week so didn't run it. It'll be run again this Thursday evening.
DO we still get patches for the 50k, 100k, 500k, ect views? Because i just reached 100k =D
Well done :) Yes I'm still giving them out, I just forgot after the last run. If it's okay with you, you'll get yours this Thurday which is the next time I'll run the script. Thanks for reminding me!
Mar 9, 2011. 2:33 AMnutsandbolts_64
says:
Hey, what happened to the total views count? I was just wondering as I've seen no activity for over a month now.
srry, i accedently added a ible to youre group, didn't mean to. you know, the new layout of ibles to add instructables to groups by clicking in the bottom right corner on that group, and i thought that you just go to the groups page. but i can't remove it... :(
That happened to me too, I was being rushed and thought clicking on one would bring me to the group page, not add the Ible I was on to the group.
You're welcome! I'm thinking about patching people for number of Instructables too, what do you thinkg? 10, 25, 50, 100?
Thanks for the subscription I felt like I was at a bus stop.
I have been there for ages then three came along at once :-)
I have been there for ages then three came along at once :-)
*high-five*
Thanks for the patch, and showing some love.
Thanks for the patch, and showing some love.
Hey Jayefuu, are you still making the total views count topics?
Yes! I haven't had time in the last month. Need to get back into the habit of doing it. Will start again this thursday. Thanks!
Wait, the group says you'll do an update the 1st and 15th of every month.
Oh. I'll update that. I had switched to running it every Thursday.
Hate is a strong word my friend. That is why we use it alot =D
Display picture, you appear to have changed it back now.
Hey jay.. if i ordered a pack of the tops trumps cards, how long do you think shipping to the united states would take?
Within two weeks? Check with gmjhowe, it will depend on whether he has any left and how fast he gets them out.
Jun 3, 2010. 1:10 PMSpycrab
says:
thanks for the '100th subscriber' patch :D
though, i can't seem to remember subscribing to you XD
though, i can't seem to remember subscribing to you XD
Jun 3, 2010. 3:43 PMSpycrab
says:
lol.
Apparently, even though i don't remember subscribing to you, i already have before i received the patch. so maybe i did 'earn' the patch :p
Apparently, even though i don't remember subscribing to you, i already have before i received the patch. so maybe i did 'earn' the patch :p
Hey, you have one of those cool avatars like Kiteman does. Where are you getting these? I feel left out...
A new project we have coming out. Gmjhowe's just finished doing all the artwork so it should be published in the next few weeks :)
Oh. Not to be pushy or anything (I don't like to sound pushy.), but am I part of this(really, I don't.)? Also, how do you really pronounce your user name?
The way I've always pronounced it was:
JAY-FOO
But you'll need to ask him that.
JAY-FOO
But you'll need to ask him that.
Thought I'd try using this space more as a blog of what I'm up to and what's to come.
So as a starter here's what I'm currently working on/thinking about:
- Instructables Top Trumps (a collaboration...coming sooon! very soon!!!)
- Ginger Wine (it's soooooo tasty I can't believe there isn't an ible already!)
- Make your own resistive decade box
- Arduino kitchen timer based on Steve's Barduino
I'm hoping by posting here what's currently in the works it'll get someone nagging me to finish things and spending more time on projects!
So as a starter here's what I'm currently working on/thinking about:
- Instructables Top Trumps (a collaboration...coming sooon! very soon!!!)
- Ginger Wine (it's soooooo tasty I can't believe there isn't an ible already!)
- Make your own resistive decade box
- Arduino kitchen timer based on Steve's Barduino
I'm hoping by posting here what's currently in the works it'll get someone nagging me to finish things and spending more time on projects!
See my new avatar as a teaser to what it will look like.
Instructables card game. 100 instructables users on cards and you play one card against the other person's next card until you have all the cards!
Hey Jay. Whens the top trump thingy gunna be done?
Just wondrin' no rush :)
Just wondrin' no rush :)
Mar 31, 2010. 10:17 PMshoyru_master_11
says:
acaually, i'll do a 5 year subscription and publish it in C# or C++
LOL LOOK AT THIS: www.instructables.com/id/Smell-Graffiti/
Look at the the box where the the rating thing and stats thing is! It is all italicized!
Haha, I made the embed code go big and orange :-)
YOU SEEM PLEASED? :-( NAH, JK :-s
YOU SEEM PLEASED? :-( NAH, JK :-s
I also have sarracenia plants. Here's a short blog post I did shortly after purchasing them in North Carolina. They look A LOT better now even though it's cold except the Tarnok. The Tarnok's been suffering since I got it. I also need to repot them since they're now touching each other. I don't have any Nepenthes, but since getting the sarracenia, I've been wanting one. I've also been eyeing some carnivorous plant seeds...
Awesome. I have those varieties :) They live in the shallow part of my mum's pond while I'm at uni. They love it! I really want some of the Nepenthes variety when I have my own space, I think they'd have to live indoors where I live though. I also have two kinds of the sticky ones (sundew?) and a venus fly trap which doesn't seem to do very well.
I had a venus fly trap that died horribly, but I got it on sale at a big box store and chalk up part of the failure on where I bought it. I would like another, but I think I'll source it better. I'm looking at getting a butterwort too. The sundews scare me because I can't help but think about how I'd repot it... The sarracenia I have are hardy to zone 6, I believe, and I'm in zone 8. Nepenthes seem to all be tropical and wouldn't survive the winters here outdoors. They scare me a little bit, but I'd still like one. I talked to a couple people at the garden club, and they all thought I was crazy for wanting one because it would be a waste for something I'd kill or something. Like they thought all pitcher plants were impossible to care for, but now I'm not so convinced.
Make an Archimedes screw that moves marbles instead of water. :D
Ok, but wouldn't that just be a miniature version of this?:
Knex Double Helix Lift
But if you still want me to make it, I'll get crackin'!
Knex Double Helix Lift
But if you still want me to make it, I'll get crackin'!
Similar, but I want you to make it so that it's on an angle (okay so it wont work vertically) but the whole casing spins not just the auger inside.
From Wikipedia:
The "screw" does not necessarily need to turn inside the casing, but can be allowed to turn with it in one piece. In ancient times people ran on the screw to turn them.
From Wikipedia:
The "screw" does not necessarily need to turn inside the casing, but can be allowed to turn with it in one piece. In ancient times people ran on the screw to turn them.
From this picture it only shows the auger turning, not the casing.
So do I need to making the casing spin too?
So do I need to making the casing spin too?
Heyy, I was just wandering if you are goingto do another knex challenge?
Thanks, Hiyadudez
Thanks, Hiyadudez
No one entered or was interested in our last one :( So probably won't bother.
I only think that not many people entered the last one because not many people like building vehicles.
Maybe if you did a more interesting topic/theme and a bit more advertising, it would be a really good competition. Also, if people know that you win a patch, people will want to enter.
Maybe if you did a more interesting topic/theme and a bit more advertising, it would be a really good competition. Also, if people know that you win a patch, people will want to enter.
 |
