author
2Instructables1,337Views17CommentsJoined July 21st, 2016

Tell us about yourself!

Complete Your Profile
  • Jesper75 commented on Jesper75's instructable My not hanging cordless drill storage9 months ago
    My not hanging cordless drill storage

    Hi, I added a couple of more pictures so you can see how I set it up. There is a charger below the helf. The charging wire goes up through a hole in the shelf, so I can charge one drill while stored. Two of my drills use the same charger, so that's why I only added one charger. I have another charger for my AEG drill on the right side og the cabinet, as can be seen in the new pictures. Thanks for your question.

    View Instructable »
  • Jesper75 commented on ericsnis's instructable Router Bit Storage Box1 year ago
    Router Bit Storage Box

    Great idea. Easy to rearrange.

    View Instructable »
  • Jesper75 commented on Alex in NZ's instructable Electronics Components Storage1 year ago
    Electronics Components Storage

    Nice, I like the aluminum hangers, although they are a little expensive. Definitely minimizes the spacing of your boxes. We'll done, and nice finish! Having used my own cabinet for a while, I still like it. But I find myself pulling half of them out until I find the one I need. I'm thinking of labeling them maybe just with a color, so it is easier to get to the right one. I don't store electronics, but all kinds of small stuff. Congrats and good luck with it.

    View Instructable »
  • Jesper75 followed Alex in NZ1 year ago
  • Jesper75 commented on technologyguy's instructable Power Bar Cord Organizer1 year ago
    Power Bar Cord Organizer

    I made something similar. I hang my cord organizer right inside the door of my shop, so I can unroll to bring power outside.

    View Instructable »
  • Jesper75 commented on waylightcreate's instructable DIY Screen Door from a single 2x61 year ago
    DIY Screen Door from a single 2x6

    Nice! Seeing this motivates me to make one. Covering the clips with thin strips of wood is really nice finish. I think even my wife might accept this! One tip: hinges can often be attached on the sides between wall and door. This way the hinge itself is hidden when the door is closed.

    View Instructable »
  • Jesper75 commented on djpolymath's instructable Drill Press Sanding Plates1 year ago
    Drill Press Sanding Plates

    Great idea with vacuum from below!

    View Instructable »
  • Jesper75 commented on J-Po's instructable Stanley Compartment Rack1 year ago
    Stanley Compartment Rack

    Hi Alex. You are right, my boxes can't hang, so I put small shelves on each side of the cabinet to have the them in the rack. I might have been able to squeeze an extra box in if they could hang, but those boxes was what I had at hand. I just screwed the side shelves in from the outside of the cabinet. Painted the whole thing with a shining paint. It covers the screws a little bit, but after all it's just a cabinet for my show. I've made a small drawing that shows you how to make this out of one long panel. I haven't put measures on it, as that depends on your cases of course. I'll recomment 5 mm from top of one box to the shelves above. There is also another picture in a higher resolution, maybe you can see some detail you are looking for.

    View Instructable »
  • Jesper75 commented on Elias Stratakos's instructable Wall Tool Holders1 year ago
    Wall Tool Holders

    Nice, what paint are you using?

    View Instructable »
  • Jesper75 commented on J-Po's instructable Stanley Compartment Rack1 year ago
    Stanley Compartment Rack

    Made a similar rack of small parts boxes last year, inspired by various youtubers. Mine was built from old Ikea melamine clothing cabinets. It's a great storage solution, and I'm sure you'll like it. My boxes have customizable dividers, but having used them for a while now I know that next time I'll prefer something with small boxes inside. Also since I'm not super organized, I can never remember which one of the boxes contain want I need, so I often find myself pulling half of them out before getting to what I need. So maybe some kind of labeling would be great.

    View Instructable »
  • Jesper75 commented on djpolymath's instructable Push Block1 year ago
    Push Block

    Mouse pad as grip, great idea!

    View Instructable »
  • Jesper75 commented on carl5blum's instructable Triple Your Tool Storage Space!1 year ago
    Triple Your Tool Storage Space!

    Interesting ideas. Vertical tool doors or vertical pull out walls. Storage surface area increases dramatically, but I'm curious to know after a while if the tools tend to fall off accidently as you suggest. Shallow drawers is another option. That too increases the tool storage surface area. Many tools are no more than maybe an inch high, when laying in a drawer.

    View Instructable »
  • Jesper75 followed Organizing, Woodworking, Siege Engines, Tools and 11 others channel 1 year ago
  • Jesper75 commented on Jesper75's instructable Root Pulling Crane1 year ago
    Root Pulling Crane

    Nice, I should have known this when my car broke its engine last year.

    View Instructable »
  • Jesper75 commented on abizar's instructable Making Drawer Dividers1 year ago
    Making Drawer Dividers

    You are right. I made this rack of "small parts boxes", that is seen in many places on youtube. At first I was really happy about it, but I have come to realise that I'm always pulling alot of boxes out of the rack, before I get to the right one. So yes, a wide drawer and with full extension slides would be much better. I do think I will have a go with the dividers, as I have an idea that they might actually be better if the stored parts are a little bigger, or come in fewer numbers.

    View Instructable »
  • Jesper75 commented on abizar's instructable Making Drawer Dividers1 year ago
    Making Drawer Dividers

    Hi Abizar. Wonderful chest, and beautifully built. I'm a big fan of shallow drawers too. Making dividers like yours is tempting, but for my drawers I started to make small boxes like Marius Hornbergers does in his video. I think I will recommend this for your next drawers, even though it is a bit more work.I like the boxes, because you can take them out and put them more conveniently where you work. But the best part is, that is is easier to re-organize things. For example if you find that the cell you are using for something is getting too small, it is easy to take the box out and pour the stuff into a larger box. I made boxes of 5x5 cm and 10x5 cm. Plan is to always keep side lengths multiple of 5 cm, so new boxes always fit in with the other boxes.

    View Instructable »
  • How to Make a Spline Jig (Use With Table Saw OR Router)

    Nice. I would like to make one, and then one mirrored too. Placing a box between such two on a table saw sled, could work for making splines in boxes.

    View Instructable »