Tell us about yourself!
that should be fine, it won't be able to give as many charges since yours is only 3780mAh but it should still work
sorry, I'm not the great Scott :D but I may be able to help you. First off, normally on the boost converter where he changes it to 5v there is a pin usually where you can adjust the current you desire, however even if yours does not have this, you can always attach a potentiometer to the output of the boost converter, and using the potentiometer the current will change based on what you set it toHope it help! -Nate
yes, however in series would not let it be able to supply as much current, and since we are only going for 5v there isn't much insentive I would say ( unless you want to skip having a boost dc converter ) but as long as you don't get do much voltage everything should be fine!
year, the power output is higher by quite a bit, so it is better as a defense device, however if you would like to use a 9v ( because it's a compact battery ) and have it powered at 6v, you could use 2 resistors and center tap between them to get 6 v ( see picture ) and you could hide those resistors up in the crevice of the boost converter of you like. Let me know if you need anything else! :D-KS
year, the power output is higher by quite a bit, so it is better as a defense device, however if you would like to use a 9v and have it powered at 9v, you could use 2 resistors and center tap between them to get 9 v ( see picture ) and you could hide those resistors up in the crevice of the boost converter of you like. Let me know if you need anything else! :D-KS
sure! Only I'm not quite sure what you mean by that, do you mean why it works the way it does?
thank you :D
I had a safety rant in the Intro, but I updated it, good thinking !
I did put a disclaimer, it is in the intro
it depends greatly on the size of the flyback you use, generally bigger = higher voltage, also if you wind your own primary the amount of turns come in to play as wel. But with this , about 20kv to 40kv I would guess
Well, it greatly depends on the flyback transformer you use, bigger ones tend to give a high voltage, I personally have gotten anywhere from 20kv to 40kv while using it
Easy High Voltage Power SupplyView Instructable »
I redid some things, first off I cut the ends of Brad nails and used them as the HV outputs, second I replaced the momentary switch I had, with a much smaller one, this will make your taser look and feel much nicer!
How To Make Light Sensor - DIY Automatic Street Light
How To Build A Vacuum Tube Tesla Coil (VTTC)
Easy 5$ Pocket TaserView Instructable »