Tell us about yourself!
Super Cheap 3D Printer From CD-Rom Drives
which pre amp did you use
Arduino Glass - Open Source Augmented Reality Headset
this is awesome
Would this workhttp://www.ebay.com/itm/Electric-Violin-Pickup-4-4-Bausch-Bridge-Preamp-Tone-Volume-Knob-Endpin-Jack-Set/391495817339?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D39836%26meid%3Da15d33a5c9ff484e81fd35ae43352f00%26pid%3D100005%26rk%3D5%26rkt%3D6%26sd%3D220838924337
Make an Electric Violin
this is like the microsoft hololensbut affordablereally cool
Power Generating Shoe
since there is a power button between the battery and recharging circuit dont u need to leave the watch on while charging it
i was also thinking about adding a m accelerometer to make the fitness portion of the legitimate
But its still really cool
Make sure you have the library installed in your libraries folder and not just in your downloads folder
Everything except for the clock portion is a gimmick
Mini Plasma Gun Under $5
would it be safe against a human
Would this oled screen workhttps://www.amazon.com/Diymall-Serial-128x64-Display-Arduino/dp/B00O2LKEW2/ref=pd_sim_147_39?ie=UTF8&psc=1&refRID=EAZJGPZ007XDGFMVXT5C
these instructions are also in the adafruit learning systemhttps://learn.adafruit.com/mini-raspberry-pi-handheld-notebook-palmtop?view=all.
I was thinking about swapping the adafruit tft with a cheaper one without the gpio headers. This would prevent the chance of me messing up when bending the pins. It would also make the project slightly cheaper as the adafruit tfts are expensive
Raspberry Pi Laptop DIY
Make your own lightsaber!