Kinetic

Wait...so where are the white rods contained? Sorry, but the pictures are a bit blurry its hard to tell.

You know what? I can see this as a slide-action gun. The slide wouldn't have to go over the entire gun, just as far as the pivoting point on the trigger to allow space for the trigger to function. You are going to want the slide to connect the ram and the bolt: the ram with a smooth connection allowing it to move freely, and the bolt with a firm, solid connection. That shouldn't be too hare to make, but I can make a sample one if you want. Also, I love the bullet transfer, but the bullet will not stay in place once loaded. To counter this, use band-powered mechanism to keep the bullet in place. See that smooth hole in the white connector directly in line with the green connector that acts as a ramp? Put a rod in there, get rid of the green connector, and put a gray (two-space) connector in there with a green rod in one of the spaces where a band can latch onto. Because the rod will be free-moving, clip on the gray connector and as the bullet is pushed in, the connector will bend down, then snap the bullet up into the barrel. You may have to lengthen the lower barrel a tiny bit so the bullet doesn't snap up prematurely, but other than that it should work.

I guess building with knex is much easier done than said. Great job on the compact design. I think this will be the first bolt action pistol we have seen!

But are you sure the tan clip is necessary? Have you tried loading the bullet without it in there? I think that the bullet will be able to maintain a straight enough path before it is re-stabilized by the part of the trigger that it passes through. I'll get to work on a slide you could use.

Beautiful. Here's a slide you could use. You might need to take off a few parts here and there to make it fit (its hard when I don't have the gun in front of me as you might have guessed lol), but the spacing between the bolt and the ram will fit your gun. Keep it up man I really like it so far.

*sorry they're sideways

Thanks, but yeah its too bad what this community is looking like. I would love to see the p90 version! I am also working on one of oblivitus' ideas with a few mods/iprovements. I think you'll like it.

Lol no worries we haven't talked in a long while. I was just hoping you weren't one of those people who just quit, as so many have been. Glad to see you're still around.

Wow thanks a ton man I love the review. I'm gonna put it on the ible thanks again for making one.

Where'd you get the idea that I thought you were a noob? I know you aren't, I have seen you around the site for a while now, and I know you are much more experienced than many others. I have just finished taking pictures of the gun, and am currently in the process of posting it. It should be up tonight.

Yes, you have to keep pulling it back. I know how to make the pump do it, but the pullback is going to have to be greater, and I am going to need more pieces to extend he barrel to house a pump with more pullback. I am just going to complete the front of the gun then post it. I'll also include a pic of my idea of pulling the band back.

That's a great idea I wish I thought of that. If you can do that I'll send you a patch, sub, and all that jazz. That would make the Kinetic Rifle so much better.

I can't wait to see what you do with it.

It is going very good, I have the pump all built into the gun, and there is no doubt as to whether I can make it pull the band back, but in doing so, I would have to extend the barrel of the gun, which I do not have the pieces to do. I think i'm just going to add the bow, touch it up a little, then post it as-is, and when I get the pieces, I'll add the pullback mech and post that, giving other people a chance to experiment with pullback mechs of their own.

Ummm maybe another week. I have to scavenge around for the last few pieces and then work out the kinks. Posting will take a while too because of the complexity and size of the gun.

Hell yes I am going to post it! And it should definitely be done before christmas, except I may run our of pieces (it uses a ton). This is going to be an amazing gun but I may not be able to have the pump pull back the rubber band as well, so it might have to be done manually. Do you think that would have too big of an affect on the usefulness of this gun?

 Yes, I am in the process right now.  It should be up this weekend.

 Thanks man-that really means a lot.  Zak was probably my biggest influence in the way i build, along with s0lekill3r, i know I havent been active at all on the site in a while and as soon as i get the vice posted-I have a couple designs that will blow you all away.

 Yeah I'm gonna post it soon, I just have some "cleaning up" to do.  I'll work on getting a forum up. 

 Thanks!  Sadly, I don't think I will have enough pieces to complete it when I wanted to, but I'll try to get more asap.

 Yeah that was happening to me a little while ago.  It eventually started working again though.  How do you like it?  Did the green connector work?

 You can't get it to work?  Is that just because of the rubber bands in the turret?  Ok.  If you don't get this then I will post a video but first you tie two bands together, or just use a long rubber band.  Second, hook the band to the turret like it shows in the pic.  Third, wind the turret downwards a couple times, making sure the band stays on the outside of the rods that are on the turret.  Then put a bullet in the the turret (in the one that would be firing next).  Then guide the band around the two black rods on the barrel to the other turret.  Repeat the process with the other turret.  

 Ya your gun is on it I'm working on the video right now.

 I uploaded the video-the quality isnt great right now because youtube is still processing it but its on the last step.  The quality will be fine in like a half hour.

 Looks great.  Hows that internal pusher concept working out for you?

 Do you think you can make me one with my turret bow on it and maybe change the colors like on oblivitus' avitars?

 Ya that would be awesome I'm just not sure what I want to be on it...

 I think its pretty cool thanks

 Yeah!  Check out my forum topic and a vid will be up soon.  What gun is that?  Looks a little like the knexsayer

 Oh, your logic bow-its kinda hard to see the bow part from that pic