loading
11 Comments

Tell us about yourself!

Complete Your Profile
  • Rideable Segway Clone - Low Cost and Easy Build

    Hi ihart sir.The problem of ERROR SIGNAL IS STILL THERE . When i press deadman switch till 20 secs it works fine, but after dat motor rotates in unconditionaly way(sometimes fast somtimes slow,backward frwd).as u said , I have twisted all the i2c wires including s1 wire but den also same problem is occuring Plz helpI have used My1016z2 geared motorAndBattery is 12 volt 12 amp..Plz reply sir

    View Instructable »
  • Rideable Segway Clone - Low Cost and Easy Build

    hi,I m also trying to built segway clone. But i have used the basement as a metal plate rather than a wooden platform.Circuit connection is completed . Program loaded into the arduino. Only problem is that, when i start my segway and press deadman switch , for 5-6 seconds it works normally , BUT after that, the motors rotate in unconditional way(sometimes frwd n sometimes reverse) taking jerks and automatically rotating fast. Plz help ihart sir i have shared pics of segway plz reply sir

    View Instructable »
  • Rideable Segway Clone - Low Cost and Easy Build

    hello ihart sir,i wanted to know more about electronics part.As i m a electronics student.how mpu 6050 has to be placed on the segway so that change can be sensed by it and motor can rotate according to it .also i have used geared motor(MY1016z2) instead of non geared motor(my1016)in india sabertooth motor driver(2x12 amp) is not available . So is there any replacement for that??also plz share pics of the electronics part of the segway with the connectionsthanks in advance !

    have u sold ur motor driver ?? if not then plz contact me on dis number+919930399436thanks in advance

    hello ihart sir,i wanted to know more about electronics part.As i m a electronics student.how mpu 6050 has to be placed on the segway so that change can be sensed by it and motor can rotate according to it .also i have used geared motor(MY1016z2) instead of non geared motor(my1016)in india sabertooth motor driver(2x12 amp) is not available . So is there any replacement for that??also plz share pics of the electronics part of the segway with the connectionsthanks in advance !

    hello ihart sir,i wanted to know more about electronics part.As i m a electronics student.how mpu 6050 has to be placed on the segway so that change can be sensed by it and motor can rotate according to it .also i have used geared motor(MY1016z2) instead of non geared motor(my1016)in india sabertooth motor driver(2x12 amp) is not available . So is there any replacement for that??also plz share pics of the electronics part of the segway with the connectionsthanks in advance !

    View Instructable »
  • Rideable Segway Clone - Low Cost and Easy Build

    ihart has not explained about the electronic part in detail. So i need help in electronic part.how the motor is able to balance the person standing on the platform only using MPU6050 sensor and motor driver.if u can explain with that by making a algorithm for the whole balancing process and coding, it would be really very helpfulplz do the needfulsabertooth 2x 12 Amp motor driver is not available on robu.in. or anywhere in INDIA ,and i have to submit my project in a week. so i need alternative for sabertooth motor driver. do u plz recommend me an alternative for it ??also share your contact number,so i can contact u and explain problems reagrding my project

    View Instructable »
  • Rideable Segway Clone - Low Cost and Easy Build

    hii adir ,i m also building a segway for my project. I m from India, here motor driver(sabertooth 2x12 amp) is not available . is there any alternate motor driver for the same ?if YES then please let me know.also if u can share the algorithm or how the balancing of the segway is obtained.plz do the needful.

    hii james,i m also building a segway for my project. I m from India, here motor driver(sabertooth 2x12 amp) is not available . is there any alternate motor driver for the same ?if YES then please let me know.also if u can share the algorithm or how the balancing of the segway is obtained.plz do the needful.

    View Instructable »
  • NawazishA2 followed Electronics channel 9 months ago
  • 2-Wheel Self Balancing Robot by using Arduino and MPU6050

    gud wrk sir!!! we r working on a homemade segway for our project. so will u plz let us ur schematics and code for reference.thankful to umail idnawazish2104@gmail.com

    gud wrk sir!!! we r working on a homemade segway for our project. so will u plz let us ur schematics and code for reference.thankful to umail idnawazish2104@gmail.com

    View Instructable »
  • NawazishA2 followed ihart9 months ago