loading
2 Comments

Tell us about yourself!

Complete Your Profile
  • DIY Bluetooth Phone Controlled BB-8 Droid with Arduino UNO

    why wont afmotor.h work

    We are using the motor shield linked within the project for the Arduino. We have the motorshield connected now but when we compile the code there is an errorArduino: 1.6.7 (Windows 10), Board: "Arduino/Genuino Uno"Sketch uses 5,786 bytes (17%) of program storage space. Maximum is 32,256 bytes.Global variables use 293 bytes (14%) of dynamic memory, leaving 1,755 bytes for local variables. Maximum is 2,048 bytes.avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xbeavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xbeavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xbeavrdude: stk500_recv(...see more »We are using the motor shield linked within the project for the Arduino. We have the motorshield connected now but when we compile the code there is an errorArduino: 1.6.7 (Windows 10), Board: "Arduino/Genuino Uno"Sketch uses 5,786 bytes (17%) of program storage space. Maximum is 32,256 bytes.Global variables use 293 bytes (14%) of dynamic memory, leaving 1,755 bytes for local variables. Maximum is 2,048 bytes.avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xbeavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xbeavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xbeavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xbeavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xbeavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xbeavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xbeavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xbeavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xbeavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xbeProblem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#up... for suggestions. This report would have more information with "Show verbose output during compilation" enabled in File > Preferences.What does this mean?

    View Instructable »