Tell us about yourself!

Complete Your Profile
  • Arduino Atmospheric Tape Measure/ MS5611 GY63 GY86 Demonstration

    Hi Mike,All working OK. Thanks for the tip with the button. Now all I have to do is get the ESP24L01 working and the ground Station with a buzzer. Thanks for your Kind help and patience. If you would like the code I could send it when you tell me how. ;-)

    View Instructable »
  • Arduino Atmospheric Tape Measure/ MS5611 GY63 GY86 Demonstration

    Sorry Mike, I meant 150 feet or 250 meters

    Your Project is really great, I have now converted the LCD to OLed because I Need to put this all in a model glider. I have a Problem with the Output which now Shows -8080.56 and the last Digits Change. I don't want to anoy you but could I send the code to you, I have done a way with the select button and want to set the beginning height by just resetting the arduino. When I tried your original code the selct did not seem to have any effect and i got 0 with the reset button. Perhasp you have a Suggestion or could get the correct height calculation going again on my code. The end Project is the set a max height at 500 meters and 800 meters and then send via nrf24L01 to the ground staion where a pizo buzzer either beeps at once per second for 500 meters and then continiously for 800 mete...

    see more »

    Your Project is really great, I have now converted the LCD to OLed because I Need to put this all in a model glider. I have a Problem with the Output which now Shows -8080.56 and the last Digits Change. I don't want to anoy you but could I send the code to you, I have done a way with the select button and want to set the beginning height by just resetting the arduino. When I tried your original code the selct did not seem to have any effect and i got 0 with the reset button. Perhasp you have a Suggestion or could get the correct height calculation going again on my code. The end Project is the set a max height at 500 meters and 800 meters and then send via nrf24L01 to the ground staion where a pizo buzzer either beeps at once per second for 500 meters and then continiously for 800 meters.I think the selction and Transmission I can cope with but the height calculation is a bit much for me, I am getting on a bit now nearly 70!I understand Mike if you do not want to get involved that much... Thanks for your help.Paul OE8PCK

    Mike,I am really stuck. You wrote that the pressure in Pascal / 12 is the height in meters. This is for height around sea Level. Does this mean that your conversion will not work at 800 meters and is it far off I mean +- 5 meters?I have tried attaching my code but I don't really know how. I am getting only -8077.xx where xx is varying on the Monitor and on my OLed.. I think it is something to do with ref and the select button which I cannot incorperate in my Setup.How could I send you my code?Paul

    View Instructable »
  • Arduino Atmospheric Tape Measure/ MS5611 GY63 GY86 Demonstration

    Hello, I am having a bit of a problem trying to get the example code MS5611data2lcd. It is not in the examples after I downloaded the MS5611.h There are threee other examples. Would it be possible for you to send me the sketch or even better the complete sketch of your LCD example that you showed in the video. I need a starting point for a project of my own and this example would be perfect. It is he only one I found on the web. My prject is for a model glider that ends a message to the ground when a certain height is reached with reference to the starting height, this is where I like your button which sets the starting point. Please help me if you can... many thanks in advance.Paul

    View Instructable »