• PaulL105 commented on Dipankar's instructable GUIDE TO LED PROJECTS1 year ago

I gave it a try and guess what? Bingo.This is what i did (see image)It pulls 7 amps and 77.6 watts.I still have to try it out flying my quadcopter though to see how much it will reduce my flight time.

• PaulL105 commented on Dipankar's instructable GUIDE TO LED PROJECTS1 year ago

In my previous post i meant to say that the amperage will be far under (beyond) the limmit of the battery, so I think it will do (perhaps for a short time, say 1-2 minutes or so) I will report as soon as I have recieved the leds and made my 100 Watt led bar.Just gonna make the gamble ;-)

In my previous post i meant to say that the amperage will be far under (beyond) the limmit of the battery, so I think it will do (perhaps for a short time, say 1-2 minutes or so)I will report as soon as I have recieved the leds and made my 100 Watt led bar.Just gonna make the gamble ;-)BTW is the sceme I showed in my previous reply (remake of your 24 watt lamp) oke?

• PaulL105 commented on Dipankar's instructable GUIDE TO LED PROJECTS1 year ago

Still a bit puzzled though.If i use a 3S lipo with 2200 mAh with 30C continuous discharge, I'm allowed to draw 11.1 volts at 2.2 x 30 = 66 Amps.The 10, 10 Amp led bar draws 1.05 x 10 = 10.5 Amps.That's way beyond the limit of my lipo.Am I right or overlooking something ?

• PaulL105 commented on Dipankar's instructable GUIDE TO LED PROJECTS1 year ago

Sorry Dipankar, I do not understand your answer (picture) quick well.My plan is making a bar like I show in my privious picture (2 rows of 5 leds of 10 watt)I ordered these leds to make a 100 watt led bar with a 2200 mAh 3S lipo:http://www.ebay.com/itm/131579408867?_trksid=p2055...I am a newbee when it comes to electronics, so I hope this is of any help to you.

• PaulL105 commented on Dipankar's instructable GUIDE TO LED PROJECTS1 year ago

Hello Dipankar,I want to make a 100 watt lamp with leds.Can I make it like this? (remade your sceme on here)See my image