loading
5 Comments

Tell us about yourself!

Complete Your Profile
  • 2-Player Bartop Arcade Machine (Powered by Pi)

    The speakers were actually butchered logitech speakers I had for 4/5 years. I took the speakers out and mounted them inside the marquee section.The grills were cheap £1 purchases on ebay from china.

    http://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR0.TRC0.H0.XHP+LP2065.TRS0&_nkw=HP+LP2065&_sacat=0This is the monitor I use. It turns back on automatically when powered off and powered back on again so no need for power switch.I took the plastic housing off from the monitor also.

    rockstarprint.co.uk were the guys who did mine, it was a bit pricey though.You can give them your exact measurements and they will print accordingly. (make sure you give them measurements slightly bigger so u can trim to size. better to be over than under).

    View Instructable »
  • 2-Player Bartop Arcade Machine (Powered by Pi)

    your door hinge should be on the inside :p

    Before doing this project I was a total DIY noob! Had to buy all the tools and learn how to use them (such as Routers etc).Its been a very enjoyable project, took about 3 times as long as it should but its now finished. Made a few smallish changes to the instructions and also built in a full PC build. (Also moved monitor size to 20" with 1600x1200 screen).Thanks for your guide!

    View Instructable »