With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Tell us about yourself!
ATARI 2600 Video Composite mod
Making Drone Canopy Without Plastic Forming...
How To Use A Piezo To Produce Tone : Basics
Make a UAV for research and photography
I made the quadcopter, thanks for the detailed instructions!I made some other choices though: I bought the Radiolink AT9, which is a 9 channel transmitter with built-in telemetry for pixhawk/APM flightcontrollers. I will use this in a next project. Really good value for money.Secondly, I lifted the cover somewhat, so I can use a 5400 mah lipo.The last alteration is that I used a cheap Eachine FPV camera + transmitter. The transmitter tends to get a little hot, so I added a small heatsink.The only thing I will add when it arrives is this:http://www.ebay.nl/itm/301404173358?_trksid=p20603...
Thank you for this detailed instructions. I am going to build one, but with a twist :-).I will use a pixhawk flight controller and a Radiolink transmitter and receiver. I will use the option to get telemetry back into the transmitter. Furthermore, the suggested motors are not available, so I have ordered 4 Turnigy Multistar 2209-980Kv 14Pole Multi-Rotor Outrunner V2 instead, and 4 Afro 20a ESC with Simonk firmware. Will this work with a 3S 5400 mAh 20c lipo that I already own?
Build a High Performance FPV Camera Quadcopter
250 Class FPV Drone Under $350
DIY ARDUINO FLIGHT CONTROLLER
Let your inbox help you discover our best projects, classes, and contests. Instructables will help you learn how to make anything!
© 2016 Autodesk, Inc.